Search results
Results from the WOW.Com Content Network
The top-of-the-line model produced 283 hp (211 kW; 287 PS), giving it a 1:1 cubic inch to horsepower ratio; [18] this lowered the Corvette's 0–60 mph (0–97 km/h) to 7.2 seconds. [ 27 ] General Motors would produce more powerful and larger displacement iterations of the small-block, until stringent emission regulations in the late 1960s ...
The LS9 was GM's 350 cubic inch truck engine used in C/K and G-series models up to 8,500 lb (3,856 kg) GVWR (gross vehicle weight rating). The LS9 used a Rochester four-barrel carburetor, and its power ratings for 1984 were 165 hp (123 kW) at 3800 rpm, and 275 lb⋅ft (373 N⋅m) torque at 1600 rpm.
The LS9 was the sole self-launching glider developed at Rolladen-Schneider. The prototype first flew in 1995, powered by a Rotax 535 two-stroke engine. Production of this engine was discontinued by Rotax, putting the LS9 project on hold pending the development of a suitable engine.
The Z06 arrived for the 2006 model year as a homologation vehicle in the third quarter of 2005 and is the lightest of all Corvette models. The Z06 was equipped with the largest-displacement small-block engine ever produced, a new 7,011 cc (7.0 L; 427.8 cu in) V8 engine codenamed the LS7 .
Perkins Diesel Conversions & Factory fitted units, by Allan T. Condie, 2nd edition 2000, ISBN 0-907742-79-3 The 4 107T was used in UK Military electricity generating sets, the engines when in need an overhaul were rebuilt by a Kent based engineering works in Ramsgate, adjacent to the inner Harbour known as Walkers Marine (Marine Engineers) Ltd. Houchins of Ashford an MOD contractor would send ...
The model range was produced under three series: the 1 + 1 ⁄ 2-ton C40 (GMC C4500) and two 2-ton trucks; the "light" C50 (GMC C5500) and "heavy" C60 (GMC C6500). [22] Sharing the cab of the Action-Line pickup trucks, medium-duty trucks used heavier-duty frame rails and suspension, a higher hoodline, and wider front and rear axles (with larger ...
The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu.The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans.
The Series 92 engines were introduced in 1974. [8] Compared to the Series 71 engines they were derived from, the Series 92 featured a larger bore of 4.84025 ± 0.00125 in (122.942 ± 0.032 mm) and an identical stroke of 5 in (130 mm) for a nominal displacement per cylinder of 92 cu in (1,510 cc), from which the Series 92 derives its name.