Search results
Results from the WOW.Com Content Network
The term sewage treatment plant (STP) (or sewage treatment works) is nowadays often replaced with the term wastewater treatment plant (WWTP). [7] [8] Strictly speaking, the latter is a broader term that can also refer to industrial wastewater treatment. The terms water recycling center or water reclamation plants are also in use as synonyms.
Symbol used in drawings Standard penetration test N values from a surficial aquifer in south Florida.. The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil.
STP will select the path with the lowest cost, that is the highest bandwidth, as the preferred link. STP will enable this preferred link as the only path to be used for Ethernet frames between the two switches, and disable all other possible links by designating the switch ports that connect the preferred path as root port .
MLWN – mean low water neaps; MLWS – mean low water springs; mm – millimetre (SI unit) MM – prefix designating a number in millions (thousand-thousand) MMbod – million barrels of oil per day; MMboe – million barrels of oil equivalent; MMboed – million barrels of oil equivalent per day; MMbpd – million barrels per day
A bonded twisted pair is a construction variant in which the two wires of each pair are bonded together for the length of the cable. Pioneered by Belden , it is intended to help assure configuration consistency during and after installation.
Offshore construction – is the installation of structures and facilities in a marine environment, usually for the production and transmission of electricity, oil, gas and other resources. It is also called maritime engineering .
MSTP is designed to be STP and RSTP compatible and interoperable without additional operational management practice, this is due to a set of measurements based on RSTP (Clause 17 of IEEE Std 802.1D, 2004 Edition) intending to provide the capability for frames assigned to different VLANs, to be transmitted along different paths within MST Regions.
Until 1982, STP was defined as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of exactly 1 atm (101.325 kPa). Since 1982, STP has been defined as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of exactly 1 bar (100 kPa, 10 5 Pa).