enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. NEMA connector - Wikipedia

   en.wikipedia.org/wiki/NEMA_connector

   All NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. 1-15P plugs have two parallel flat blades, 1 ⁄ 4 inch (6.4 mm) wide, 0.06 inches (1.5 mm) thick, 5 ⁄ 8 – 23 ⁄ 32 inch (15.9–18.3 mm) long, and spaced 1 ⁄ 2 inch (12.7 mm) apart. 1-15R receptacles have been prohibited in new construction in ...

3. NEMA enclosure types - Wikipedia

   en.wikipedia.org/wiki/NEMA_enclosure_types

   Below is a list of NEMA enclosure types; these types are further defined in NEMA 250- Enclosures for Electrical Equipment. Each type specifies characteristics of an enclosure, but not, for example, a specific enclosure size. Note that higher numbers do not include the lower-numbered tests. For example, types 3, 4 and 6 are intended for outdoor ...

4. NEMA size - Wikipedia

   en.wikipedia.org/wiki/NEMA_size

   NEMA (National Electrical Manufacturers Association) contactors and motor starters are rated by sizes. These sizes are grouped by rated current and power . [ 1 ] [ 2 ]

5. AC power plugs and sockets - Wikipedia

   en.wikipedia.org/wiki/AC_power_plugs_and_sockets

   The NEMA 5-15 plug has two flat parallel blades like NEMA 1-15, and a ground (earth) pin. [48] It is rated 15 A at 125 volts. The ground pin is longer than the line and neutral blades, such that an inserted plug connects to ground before power.

6. AC power plugs and sockets: British and related types

   en.wikipedia.org/wiki/AC_power_plugs_and_sockets:...

   BS 1362 specifies sand-filled ceramic-bodied cylindrical fuses, with dimensions of 1 in (25 mm) in length, with two metallic end caps of 1 ⁄ 4 in (6.4 mm) diameter and roughly 1 ⁄ 5 in (5.1 mm) long. The standard specifies breaking time versus current characteristics only for 3 A or 13 A fuses.

7. SAE J1772 - Wikipedia

   en.wikipedia.org/wiki/SAE_J1772

   The signal is a 1 kHz square wave at ±12 volts generated by the EVSE to detect the presence of the vehicle, communicate the maximum allowable charging current, and control charging begin/end. [ 21 ] ^ Top row is spaced 6.8 mm (0.27 in) above the centerline of the connector and the pins are spaced 15.7 mm (0.62 in) apart about the centerline.