Search results
Results from the WOW.Com Content Network
The tension of the spring is set by the propeller control lever, which sets the RPM. The governor will maintain that RPM setting until an engine overspeed or underspeed condition exists. When an overspeed condition occurs, the propeller begins to rotate faster than the desired RPM setting. This would occur as the plane descends and airspeed ...
During forward flight, the cyclic control inputs cause flight path changes similar to fixed-wing aircraft flight; left or right inputs cause the helicopter to roll into a turn in the desired direction, and forward and back inputs change the pitch attitude of the helicopter resulting in altitude changes (climbing or descending flight).
In this case generally forward reverse synchronizers are replaced by the multi-plate friction clutches. Typically the multi-plate clutches are arranged on the main shaft or on the counter shaft. The forward reverse section of the gear box is generally located in the forward section as close to the engine as possible.
Counter-rotating propellers generally turn clockwise on the left engine and counterclockwise on the right. The advantage of such designs is that counter-rotating propellers balance the effects of torque and P-factor, meaning that such aircraft do not have a critical engine in the case of engine failure.
The Maybach system is essentially a simplified version of the double differential, or more accurately in mechanical terms, a double controlled differential. It replaces the double differential's forward and reverse steering shaft and clutch system with a single shaft that spins in one direction, and brakes on the idlers.
Should the tail rotor fail randomly during cruise flight, forward momentum will often provide some directional stability, as many helicopters are equipped with a vertical stabilizer. The pilot would then be forced to autorotate and make an emergency landing with significant forward airspeed, which is known as a running landing or roll-on landing.
A right-handed propeller in forward gear will tend to push the stern of the boat to starboard (thereby pushing the bow to port and turning the boat counter-clockwise) unless the rotation is corrected for. In reverse gear, the turning effect will be much stronger and with opposite direction (pushing the aft to port). A left-handed propeller acts ...
A propeller that turns clockwise to produce forward thrust, when viewed from aft, is called right-handed. One that turns anticlockwise is said to be left-handed. Larger vessels often have twin screws to reduce heeling torque , counter-rotating propellers , the starboard screw is usually right-handed and the port left-handed, this is called ...