Search results
Results from the WOW.Com Content Network
Table II-5-1-2 Aircraft approach categories do not change during day-to-day operation. To change an aircraft's category, an aircraft must be re-certified with a different maximum landing mass. [1]: II-5-1-3 Pilots may not use a lower category than the one certified, but may choose to use a higher category for higher speed approaches. [2]
A single-engined Cessna 150L's airspeed indicator indicating its V-speeds in knots. In aviation, V-speeds are standard terms used to define airspeeds important or useful to the operation of all aircraft. [1] These speeds are derived from data obtained by aircraft designers and manufacturers during flight testing for aircraft type-certification.
Fast aircraft, for example military jets, may enter the pattern with a run-and-break (in the US, overhead maneuver or overhead break). The aircraft flies at speed along the final leg, and makes a sharp, high-G turn above midfield to lose speed and arrive on the downwind leg at pattern altitude and in landing configuration.
The minimum control speed during approach and landing (V MCL) is similar to V MCA, but the aircraft configuration is the landing configuration. V MCL is defined for both part 23 <FAR 23.149 (c)> and part 25 aircraft in civil aviation regulations.
At a glance, the pilot can determine a recommended speed (V speeds) or if speed adjustments are needed. Single and multi-engine aircraft have common markings. For instance, the green arc indicates the normal operating range of the aircraft, from V S1 to V NO. The white arc indicates the flap operating range, V SO to V FE, used for approaches ...
An "approach plate" depicting an instrument approach procedure for an ILS approach to Tacoma Narrows Airport in the United StatesIn aviation, an instrument approach or instrument approach procedure (IAP) is a series of predetermined maneuvers for the orderly transfer of an aircraft operating under instrument flight rules from the beginning of the initial approach to a landing, or to a point ...
Turn at constant speed Approach and landing Takeoff. The speed, height and trim angle of attack are different for each flight condition, in addition, the aircraft will be configured differently, e.g. at low speed flaps may be deployed and the undercarriage may be down.
In aviation, the maneuvering speed of an aircraft is an airspeed limitation at which the full deflection of the controls can be made at without risking structural damage. [1] The maneuvering speed of an aircraft is shown on a cockpit placard and in the aircraft's flight manual but is not commonly shown on the aircraft's airspeed indicator.