Search results
Results from the WOW.Com Content Network
The UK reorder tone uses a 400 Hz tone with a cadence of 0.4 seconds on, 0.35 seconds off, 0.225 seconds on, 0.525 seconds off. In some instances the Number Unobtainable Tone may be used instead. This is a continuous, uninterrupted 400 Hz tone.
The signal may be implemented by removal of battery on the circuit (open switching interval) or by polarity reversal of the tip and ring conductors of the telephone line. An analogue telephone line may also send tones, such as a busy signal, reorder tone, or dial tone, to indicate a call has ended.
The reorder tone, also known as the fast busy tone, or the congestion tone, or all trunks busy (ATB) tone is an audible call progress tone in the public switched telephone network (PSTN) that is returned to a calling party to indicate that the call cannot be processed through the network.
Low tone, also busy tone, is defined as having frequency components of 480 and 620 Hz at a level of −24 dBm and a cadence of one half second ON and one half second OFF. Reorder tone, also often called fast busy tone, is the same tone, but with a cadence of 0.25 of a second ON and 0.25 of a second OFF. The original plan had two slightly ...
A signal tone or signalling tone is a steady or pulsating periodic signal typically in the frequency range of sound for indicating a condition, communication protocol state, or serve as an audible warning. It may be composed of multiple frequency components, or could be a pure tone.
But instead of calls being overflowed to main or tandem routes shared with other calls, the unsuccessful callers receive a reorder tone from their local or tandem exchange. If the calls were overflowed to the tandem route, the caller would receive a busy tone from the exchange serving the radio station, and the sudden peak would disrupt calls ...
A disconnect tone in telephony is a tone provided to the remaining party to a call after the remote party hangs up. Typically, the disconnect tone is a few cycles of the reorder , busy , or the off-hook tone (e.g. in US), or between five and fifteen seconds of the Number Unobtainable tone (e.g. in UK).
The third tone segment may be of long or short duration but is limited to the lower frequency state. Currently, the third tone segment has been assigned both a fixed long duration and a fixed lower frequency. This fixed assignment of the third tone provides a reference or calibration point for detection devices. [1] [2]