Ads
related to: hoist v5 replacement cable tool extension pole system with 2 way light switch- Safety Latches
Standard on all
Lug-All hoists.
- Lug-All
ISO 9001-2008 Certified
Made in the USA
- Industrial Strength
Engineered for
reliable operation.
- Made in the USA
Carefully Constructed.
Lasts for Decades.
- Safety Latches
Search results
Results from the WOW.Com Content Network
Hoist atop an elevator. A hoist is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use chain, fiber or wire rope as its lifting medium.
A similar heavy-duty unit with a combination chain and cable became available in 1935 that was used by railroads, but lacked the success of the cable-only type units. [1] A similar tool to a come-along is a cable puller, which does not have a drum and ratchet but directly grips the cable, allowing unlimited lengths of wire rope to be used.
The mechanical advantage at the differential sprocket pair equals P 1 / P 1 − P 2 . Because there is a traveling pulley at the load, this doubles the mechanical advantage of the fixed (anchored) sprocket assembly, leading to a total mechanical advantage of 2 × P 1 / P 1 − P 2 .
A gin pole derrick (also known as standing derrick or pole derrick) is a derrick without a boom and with single tower or mast supported by four guy wires (two side guys, a fore guy and a rear guy). Its guys are so arranged from its top as to permit leaning the mast in any direction.
The poles can be varied at a ratio of 1:2 and thus the speed can be varied at 2:1. [7] [8] [9] Normally, the electrical configuration of windings is varied from a delta connection (Δ) to a double star connection (YY) configuration in order to change the speed of the motor for constant torque applications, such as the hoists in cranes.
This makes it easier to control the elevator, as it compensates for the differing weight of cable between the hoist and the cab. If the elevator cab is at the top of the hoist-way, there is a short length of hoist cable above the car and a long length of compensating cable below the car and vice versa for the counterweight.
A drum hoist (steel wire rope visible) and motor. In underground mining a hoist or winder [1] is used to raise and lower conveyances within the mine shaft.Modern hoists are normally powered using electric motors, historically with direct current drives utilizing Ward Leonard control machines and later solid-state converters (), although modern large hoists use alternating current drives that ...
These can me mounted in a variety of locations throughout the hoist. When activated, a red warning light and/or alarm sounds in the cab. Below grade reach is the distance that the hook head travels below the lifting bar on the container. This distance varies between hoist systems, ranging from 1 to 24 in or 25 to 610 mm.
Ads
related to: hoist v5 replacement cable tool extension pole system with 2 way light switch