Ads
related to: real life examples of drip irrigation videos
Search results
Results from the WOW.Com Content Network
Drip irrigation or trickle irrigation is a type of micro-irrigation system that has the potential to save water and nutrients by allowing water to drip slowly to the roots of plants, either from above the soil surface or buried below the surface.
The first experimental system of this type was established in 1959. In the early 1960s, Blass developed and patented this method and the new dripper was the first practical surface drip irrigation emitter. During the years 1960 to 1965 Blass developed the drip-irrigation systems and sold them inside Israel and abroad.
Driptech Inc. is a company engaged in making of irrigation-equipment, a type of drip irrigation method. The company won awards for its innovative, low cost drip irrigation system, eliminating expensive and complex emitters used by traditional drip irrigation systems. [1] The company is based out of Mountain View, California.
A one-US-gallon-per-hour (3.8 L) drip flow controller feeding an 82-foot-long (25 m) drip line with check valves comprising 82 drip points along its length so each drip point is putting out about 1 / 82 US gallon (46 mL) per hour. Crimson clover sprouts grown on 1 / 8-inch (0.32 cm) urethane foam mats and flagstone.
Micro-irrigation, sometimes called localized irrigation, low volume irrigation, or trickle irrigation is a system where water is distributed under low pressure through a piped network, in a pre-determined pattern, and applied as a small discharge to each plant or adjacent to it. Traditional drip irrigation use individual emitters, subsurface ...
The Kuhl irrigation system in the Kangra Valley of Himachal Pradesh is a remarkable example of traditional community-managed gravity flow irrigation. This system plays a crucial role in supporting agriculture in the region, allowing farmers to efficiently utilize water resources in the challenging Himalayan terrain.
Micro-irrigation, also called Micro-spray,localized, low-volume, low-flow, or trickle irrigation, is an irrigation method with lower water pressure and flow than a traditional sprinkler system. Low-volume irrigation is used in agriculture for row crops , orchards , and vineyards .
Most drip tubes/tapes used in SSTI are pressure compensating. For example, using a 16mm drip tape, a run of up to 180 m can be achieved from one connection. Longer runs of up to 1,000 m can be achieved using lower flow rates per lineal metre and/or larger diameter drip tape. The following components make up a typical SSTI installation:
Ads
related to: real life examples of drip irrigation videos