Search results
Results from the WOW.Com Content Network
There is an axial combustion chamber between the compressor stages and the HP turbine. A mixer is built in to the jetpipe to mix cold bypass air with the hot exhaust gases. The engine has an overall pressure ratio of 35:1, which is extremely high for an engine with a
The PW 300 series has been developed in partnership with MTU who are responsible for the low pressure turbine. The first variant, the PW305A, has the following configuration and was designed with a core flexible enough for engines with take-off thrusts from 20 kN to 31 kN (4,500 to 7,000 lb): a single-stage fan driven by a three-stage low pressure turbine, supercharging a four-stage axial ...
The -5 model was certified in 1982, and a decade later, an engine utilizing the TFE731-5 power section and a TFE731-3 fan was built and designated the TFE731-4, intended to power the Cessna Citation VII aircraft. [4] The most recent version is the TFE731-50, based on the -60 used on the Falcon 900DX, which underwent its flight test program in ...
The Pratt & Whitney Canada PW600 series is a family of small turbofan engines developed by Pratt & Whitney Canada producing between 950 and 1,615 lbf (4.23 and 7.18 kN) of thrust and powering the Eclipse 500/550, the Cessna Citation Mustang and the Embraer Phenom 100.
Honeywell maintenance program is $447 for two engines per hour. [5] Borescope inspections extends time between overhaul and some engines have remained installed for up to 10,000 hr. [3] It has line replaceable components installed with hand tools and is designed for condition-based maintenance. [2]
The engine final assembly line is located at MTU Aero Engines at their location in Hanover, Germany. LAN Airlines confirmed an order for 15 Airbus A318 aircraft, for a total of 34 engines (30 installed and 4 spares) powered by PW-6000 engines on 15 August 2005. In addition, LAN signed with Pratt and Whitney to power up to 25 option aircraft.
The engine's design is unusual; the core flow path is reversed twice. Aft of the fan, the axial compressor has five stages, after which the gas path progresses to the aft end of the engine. There, it is reversed to flow through a centrifugal compressor stage, the combustors and then the turbine stages.
The 715 shp TPE331-6 used in the Beech King Air B100 have a 400-hr. fuel nozzle cleaning interval, 1,800-hr. hot section inspection interval and a 5,400-hr. time between overhaul; approval is possible for 3,000-hr. HSIs and 6,000-hr. overhauls and engine reserves are cheaper than for the PT6A.