Search results
Results from the WOW.Com Content Network
NVM Express over Fabrics (NVMe-oF) is the concept of using a transport protocol over a network to connect remote NVMe devices, contrary to regular NVMe where physical NVMe devices are connected to a PCIe bus either directly or over a PCIe switch to a PCIe bus.
Non-volatile memory (NVM) or non-volatile storage is a type of computer memory that can retain stored information even after power is removed. In contrast, volatile memory needs constant power in order to retain data.
In a 2019 research, the viability of TEG active cooling was tested. [citation needed] The test was applied on a Raspberry PI3, a small single-board computer, equipped with a fan powered by TEG and was compared alongside another powered by a commercial passive cooler. Throughout the research, the voltage, the power, and the temperature in both ...
The Raspberry Pi 3 Model B was released in February 2016 with a 1.2 GHz 64-bit quad core ARM Cortex-A53 processor, on-board 802.11n Wi-Fi, Bluetooth and USB boot capabilities. [23] The Raspberry Pi 3 Model B+ was launched on Pi Day 2018 with a faster 1.4 GHz processor, a three-times faster Gigabit Ethernet (throughput limited to ca. 300 Mbit/s ...
A size comparison of an mSATA SSD (left) and an M.2 2242 SSD (right) M.2, pronounced m dot two [1] and formerly known as the Next Generation Form Factor (NGFF), is a specification for internally mounted computer expansion cards and associated connectors.
A finned air cooled heatsink with fan clipped onto a CPU, with a smaller passive heatsink without fan in the background A 3-fan heatsink mounted on a video card to maximize cooling efficiency of the GPU and surrounding components Commodore 128DCR computer's switch-mode power supply, with a user-installed 60 mm cooling fan.
Active-state power management (ASPM) is a power management mechanism for PCI Express devices to garner power savings while otherwise in a fully active state. Predominantly, this is achieved through active-state link power management; i.e., the PCI Express serial link is powered down when there is no traffic across it.
Thermoelectric cooling uses the Peltier effect to create a heat flux at the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, depending on the direction of the current.