Search results
Results from the WOW.Com Content Network
Bags have been used as standard measures for a variety of commodities which were actually supplied in bags or sacks. These include: Cement is commonly sold in bags of 94 pounds weight, because this is about 1 cubic foot of powdered cement. [1] Agricultural produce in England was sold in bags which varied in capacity depending on the place and ...
In the American oil industry, a sack represents the amount of portland cement that occupies 1.15 cubic feet (8.6 US gal; 33 L), and in most cases weighs 94 pounds (43 kg). [8] Other uses in the US include the measurement by volume of salt, where one sack is 215 pounds (98 kg), cotton where one sack is 140 pounds (63.5 kg) and flour, where one ...
Its capacity is normally around 1,000 kg or 2,200 lb, but the larger units can store even more. A FIBC designed to transport one metric ton (0.98 long tons; 1.1 short tons) of material will itself only weigh 5–7 lb (2.3–3.2 kg). Transporting and loading is done on either pallets or by lifting it from the loops. Bags are made with either one ...
2 is around 0.80 kg (1.8 lb) CO 2 per kg finished cement. Electrical power generation Varies with local power source. Typical electrical energy consumption is on the order of 90–150 kWh per tonne cement, equivalent to 0.09–0.15 kg (0.20–0.33 lb) CO 2 per kg finished cement if the electricity is coal-generated.
The parts are in terms of weight – not volume. For example, 1-cubic-foot (0.028 m 3) of concrete would be made using 22 lb (10.0 kg) cement, 10 lb (4.5 kg) water, 41 lb (19 kg) dry sand, 70 lb (32 kg) dry stone (1/2" to 3/4" stone). This would make 1-cubic-foot (0.028 m 3) of concrete and would weigh about 143 lb (65 kg). The sand should be ...
The IEEE symbol for the cubic foot per second is ft 3 /s. [1] The following other abbreviations are also sometimes used: ft 3 /sec; cu ft/s; cfs or CFS; cusec; second-feet; The flow or discharge of rivers, i.e., the volume of water passing a location per unit of time, is commonly expressed in units of cubic feet per second or cubic metres per second.
This is for cubic feet, cubic centimeters, etc., not for converting linear measures to things like gallons. It only accepts numeric input, not units, and does not perform conversions. By default, it simply outputs the calculated volume, rounded to two decimal places (if rounding can be applied). Rounding value can be changed.
All concrete structures will crack to some extent, due to shrinkage and tension. Concrete which is subjected to long-duration forces is prone to creep. The density of concrete varies, but is around 2,400 kilograms per cubic metre (150 lb/cu ft). [1] Reinforced concrete is the most common form of concrete.