Search results
Results from the WOW.Com Content Network
[[Category:Tire manufacturer templates]] to the <includeonly> section at the bottom of that page. Otherwise, add <noinclude>[[Category:Tire manufacturer templates]]</noinclude> to the end of the template code, making sure it starts on the same line as the code's last character.
Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.
Uniform Tire Quality Grading, commonly abbreviated as UTQG, is a set of standards for passenger car tires that measures a tire's treadwear, temperature resistance and traction. The UTQG was created by the National Highway Traffic Safety Administration in 1978, a branch of the United States Department of Transportation (DOT). [ 1 ]
A tire-pressure monitoring system (TPMS) monitors the air pressure inside the pneumatic tires on vehicles. [1] A TPMS reports real-time tire-pressure information to the driver, using either a gauge, a pictogram display, or a simple low-pressure warning light. TPMS can be divided into two different types – direct (dTPMS) and indirect (iTPMS).
Cold inflation pressure is the inflation pressure of tires as measured before a car is driven and the tires warmed up. Recommended cold inflation pressure is displayed in the owner's manual and on the Tire Information Placard attached to the vehicle door edge , pillar , glovebox door or fuel filler flap .
This template is used to tag articles or sections for multiple maintenance issues and display the alerts in a single box. Template parameters [Edit template data] This template prefers inline formatting of parameters. Parameter Description Type Status Issues 1 The issues to include. Use full template syntax, with new lines between them. Content suggested Collapsed by default? collapsed Enter ...