Search results
Results from the WOW.Com Content Network
Diagram showing lap and lead and their relation to valve travel. When on the move, a steam locomotive requires steam to enter the cylinder at precise times relative to the piston's position. [3] This entails controlling the admission and exhaust of steam to and from the cylinders with a valve linked to the motion of the piston. [3]
The connection between piston and main rod is a crosshead, which slides on a horizontal bar behind the cylinder. [2] [5] [3]: 55 Piston rod Connects the piston to the cross-head. [2] [3]: 61 Piston Produces the motion for the locomotive from expansion of the steam.
Deeley valve gear - fitted to several express locomotives on the Midland Railway. The combination levers were driven, as normal, from the crossheads. Each expansion link was driven from the crosshead on the opposite side of the engine. Young valve gear - used the piston rod motion on one side of the locomotive to drive the valve gear on the ...
The cylinder is made pressure-tight with end covers and a piston; a valve distributes the steam to the ends of the cylinder. Cylinders were initially cast iron , but later made of steel . The cylinder casting includes other features such as (in the case of Stephenson's Rocket ) valve ports and mounting feet. [ 1 ]
One is a steam piston to move the rod as required. The other, containing oil, holds the rod in a fixed position when the steam is turned off. Control is by a small three-way steam valve (“forward”, “stop”, “back”) and a separate indicator showing the position of the rod and thus the percentage of cutoff in use.
In a steam engine, cutoff is the point in the piston stroke at which the inlet valve is closed. On a steam locomotive, the cutoff is controlled by the reversing gear.. The point at which the inlet valve closes and stops the entry of steam into the cylinder from the boiler plays a crucial role in the control of a steam engine.
This caused the motor to be extremely noisy and rough. Fine control of a locomotive at low speed was also difficult, partly due to the rough running, partly due to the inherent coarseness of a 14-step speed scale, and partly because there was a significant delay between operator input to the controller and response from the locomotive.
An early working model of a steam rail locomotive was designed and constructed by steamboat pioneer John Fitch in the United States probably during the 1780s or 1790s. [40] His steam locomotive used interior bladed wheels [clarification needed] guided by rails or tracks. Union Pacific 844, an "FEF-3" 4-8-4 "Northern" type steam locomotive