Search results
Results from the WOW.Com Content Network
Activated sludge tank at Beckton sewage treatment plant, UK.The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa.
The sludge age may be too low to enable nitrification. The typical control band for the concentration of MLSS is 2 to 4 g/L for conventional activated sludge, or up to 15 g/L for membrane bioreactors. One of the easiest control procedures for activated sludge systems is the Constant Mixed Liquor Suspended Solids method.
Activated sludge model is a generic name for a group of mathematical methods to model activated sludge systems. The research in this area is coordinated by a task group of the International Water Association (IWA). Activated sludge models are used in scientific research to study biological processes in hypothetical systems.
One type of system that combines secondary treatment and settlement is the cyclic activated sludge (CASSBR), or sequencing batch reactor (SBR). Typically, activated sludge is mixed with raw incoming sewage, and then mixed and aerated. The settled sludge is run off and re-aerated before a proportion is returned to the headworks. [19]
Fecal sludge collected from pit latrines near Durban, South Africa, awaiting further treatment by drying. Sludge (possibly from Middle English slutch 'mud, mire', or some dialect related to slush) [1] is a semi-solid slurry that can be produced from a range of industrial processes, from water treatment, wastewater treatment or on-site sanitation systems.
The history of sewage treatment had the following developments: It began with land application (sewage farms) in the 1840s in England, followed by chemical treatment and sedimentation of sewage in tanks, then biological treatment in the late 19th century, which led to the development of the activated sludge process starting in 1912.
In most conventional activated sludge processes or aerobic granular reactor, the microorganisms grow in flocs. Flocs are defined as a mass of microorganisms that are held together by slime or fungal filaments, which help with aerobic decomposition and trapping particles (et al. Wilen). [3] Activated sludges are built with two physical separate ...
Sewage sludge treatment is the process of removing contaminants from wastewater.Sewage sludge is produced from the treatment of wastewater in sewage treatment plants and consists of two basic forms — raw primary sludge and secondary sludge, also known as activated sludge in the case of the activated sludge process.