Search results
Results from the WOW.Com Content Network
Ducted fan tail rotors have also been used in the Russian Kamov Ka-60 medium-lift helicopter, [17] and also on the Japanese military's Kawasaki OH-1 Ninja reconnaissance rotorcraft. French light helicopter manufacturer Hélicoptères Guimbal has also used a Fenestron for their Guimbal Cabri G2, a compact reciprocating engine-powered rotorcraft ...
The CoAX 2D/2R was originally known as the FLIP 2 (Fly In Perfection) and is a derivative of the FLIP 1, a conventional helicopter with a main and tail rotor.[1]The CoAX 2D/2R was designed to comply with the European Class 6 microlight helicopter rules, including the category's maximum takeoff weight of 450 kg (992 lb).
The EC130 is a single-engine helicopter. It uses a three-bladed Starflex main rotor which is matched to an enclosed tail fan anti-torque device, known as a Fenestron, the latter feature replacing the traditional tail rotor found on the older AS350. The Fenestron has unevenly spaced blades to reduce noise generation by 50% compared to a ...
The tail rotor is a smaller rotor mounted so that it rotates vertically or near-vertically at the end of the tail of a traditional single-rotor helicopter. The tail rotor's position and distance from the center of gravity allow it to develop thrust in a direction opposite that of the main rotor's rotation, thereby countering the torque effect ...
A floor-mounted, foot-activated push-to-talk switch facilitates intercom communications for the left-seat occupant, although some later models may be equipped with a voice-activated intercom system. The helicopter rotor system consists of a two-bladed main rotor and two-bladed antitorque rotor on the tail, each equipped with a teetering hinge ...
Small baggage can be stored in under seat lockers. [2] Cabin access is through forward hinged doors in each side. [1] A 84.5 kW (113 hp) Rotax 914 turbocharged, liquid cooled, flat four piston engine with narrow rectangular cheek radiators is mounted behind the seats and partly exposed at the rear, driving a two blade main rotor.
The UH-1H's dynamic components include the engine, transmission, rotor mast, main rotor blades, tail rotor driveshaft, and the 42-degree and 90-degree gearboxes of the tail rotor. The main rotor transmission consists of a 90 degree bevel gear assembly with a reduction ratio of 2.14:1, followed by a 2-stage planetary gearset with a ratio of 9.53 ...
The A.104 was a slightly enlarged version of the A.103, and added a second seat beside the pilot's seat. The cockpit was enclosed by a perspex bubble with the engine at the rear and the tail rotor carried on an enclosed boom. Two piston-engined prototypes were built, followed by a single example of a turbine-engined variant designated A.104BT ...