Search results
Results from the WOW.Com Content Network
Center of gravity (CG) limits are specified longitudinal (forward and aft) and/or lateral (left and right) limits within which the aircraft's center of gravity must be located during flight. The CG limits are indicated in the airplane flight manual. The area between the limits is called the CG range of the aircraft. Weight and Balance
Air vehicles use a coordinate system of axes to help name important parameters used in the analysis of stability. All the axes run through the center of gravity (called the "CG"): "X" or "x" axis runs from back to front along the body, called the Roll Axis. "Y" or "y" axis runs left to right along the wing, called the Pitch Axis.
The KF airfoil was designed by Richard Kline and Floyd Fogleman. Aircraft wing showing the KFm4 Step. In the early 1960s, Richard Kline wanted to make a paper airplane that could handle strong winds, climb high, level off by itself and then enter a long downwards glide.
Yawing also increases the speed of the outboard wing whilst slowing down the inboard wing, with corresponding changes in drag causing a (small) opposing yaw moment. N r {\displaystyle N_{r}} opposes the inherent directional stiffness which tends to point the aircraft's nose back into the wind and always matches the sign of the yaw rate input.
Mean aerodynamic chord (MAC) is defined as: [6] = (), where y is the coordinate along the wing span and c is the chord at the coordinate y.Other terms are as for SMC. The MAC is a two-dimensional representation of the whole wing. The pressure distribution over the entire wing can be reduced to a single lift force
The Monarch Butterfly has a very low 0.168 kg/m 2 wing loading The McDonnell Douglas MD-11 has a high 837 kg/m 2 maximum wing loading. In aerodynamics, wing loading is the total weight of an aircraft or flying animal divided by the area of its wing.
A straight-winged North American FJ-1 flying next to a swept-wing FJ-2 in 1952.. There are three main reasons for sweeping a wing: [1] 1. to arrange the center of gravity of the aircraft and the aerodynamic center of the wing to coincide more closely for longitudinal balance, e.g. Messerschmitt Me 163 Komet and Messerschmitt Me 262.
Clark Y is the name of a particular airfoil profile, widely used in general purpose aircraft designs, and much studied in aerodynamics over the years. The profile was designed in 1922 by Virginius E. Clark using thickness distribution of the German-developed Goettingen 398 airfoil. [1]