Search results
Results from the WOW.Com Content Network
Bullets had the manufacturer code over the Quarter number and two-digit year of production engraved on the base (e.g. Pk/2-26 is Zaklady Amunicyjne, Pocisk, 2nd Quarter of 1926). 8mm Lebel "Balle D" bullets were differenced from 7.9mm Mauser bullets by a capital letter "D" inset between the contractor code and the date (e.g. Pk/D/2-26).
A regular and an armor piercing variant were designed, the non-armor piercing bullet taken from the 9×19mm Parabellum and the armor piercing bullet was taken from the RG054 cartridge, it has a black painted tip. [1] The case is a stretched 9x19mm case, manufactured from phosphate varnished steel.
The first successful documented case of forensic firearm examination occurred in 1835 when a member of the Bow Street Runners in London matched a recovered bullet from a murder victim to a specific mold in a suspect's home confirming that he made the bullet; this gave further evidence that the bullet maker was the perpetrator and he was ...
The MIL-STD-1168 is a set of standard codes used to identify munitions (ammunition, explosives and propellants). It was designed to replace the previous confusing Ammunition Identification Code (AIC) system used by the United States Army Ordnance Department.
A guide to the recoil from the cartridge, and an indicator of bullet penetration potential. The .30-06 Springfield (at 2.064 lbf-s) is considered the upper limit for tolerable recoil for inexperienced rifle shooters. [2] Chg: Propellant charge, in grains; Dia: Bullet diameter, in inches; BC: Ballistic coefficient, G1 model; L: Case length (mm)
US 6886284, Lizotte, Todd E., "Firearm microstamping and micromarking insert for stamping a firearm identification code and serial number into cartridge shell casings and projectiles", published 2005-05-03, assigned to Identification Dynamics LLC Belanger, Rene M., Daniel S. Jones, Sylvain Lagace, Michael McLean, and Homero A. Yasquez.
Microstamping is a proprietary ballistics identification technology. Microscopic markings are engraved onto the tip of the firing pin and onto the breech face of a firearm with a laser. When the gun is fired, these etchings are transferred to the primer by the firing pin and to the cartridge case head by the breech face, using the pressure ...
War Department Ordnance Field Service Bulletin (OFSB) No. 3-14 (Tentative) Ammunition Identification Code (A.I.C.), January 16, 1942. War Department Ordnance Field Service Bulletin (OFSB) No. 3-14 (3rd edition) Ammunition Identification Code (A.I.C.), July 1, 1943. War Department Supply Manual ORD-11 SNL Group S (Bombs, Grenades and Pyrotechnics)