Search results
Results from the WOW.Com Content Network
A fuel tank (also called a petrol tank or gas tank) is a safe container for flammable fluids, often gasoline or diesel fuel. Though any storage tank for fuel may be so called, the term is typically applied to part of an engine system in which the fuel is stored and propelled ( fuel pump ) or released (pressurized gas) into an engine .
In the ANG process, natural gas adsorbs to a porous adsorbent at relatively low pressure (100 to 900 psi) and ambient temperature, solving both the high-pressure and low-temperature problems. If a suitable adsorbent is used, it is possible to store more gas in an adsorbent-filled vessel than in an empty vessel at the same pressure.
According to Primus Green Energy, the STG+ process converts natural gas into 90+-octane gasoline at approximately 5 US gallons per million British thermal units (65 litres per megawatt-hour). [4] The energy content of gasoline is 120,000 to 125,000 British thermal units per US gallon (9.3 to 9.7 kilowatt-hours per litre), making this process ...
The engine gained new 29,000 PSI piezo injectors as well as a completely reworked fuel system which was now powered by the Bosch CP4 pump, that also now supports up to 20% biodiesel mixtures and a urea injection (to reduce nitrogen oxides) with a 5.3 gallon DEF tank. This engine has a fuel injector in the exhaust tract, to allow raw fuel ...
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
Compressed natural gas (CNG) is a fuel gas mainly composed of methane (CH 4), compressed to less than 1% of the volume it occupies at standard atmospheric pressure.It is stored and distributed in hard containers at a pressure of 20–25 megapascals (2,900–3,600 psi; 200–250 bar), usually in cylindrical or spherical shapes.
Predator operators at Balad Camp Anaconda, Iraq, August 2007. Each Predator air vehicle can be disassembled into six modules and loaded into a container. This enables all system components and support equipment to be rapidly deployed worldwide. The largest component is the ground control station (GCS) which is designed to roll into a C-130 ...
The aircraft is an Avenger-based wing-body-tail design with a standard D-704 buddy tank refueling system that has an electro-optical ball like the Predator and Reaper, landing gear that pulls into the fuselage, and a system for maneuvering around the flight deck using gestures from the flight crew.