Search results
Results from the WOW.Com Content Network
In the United Kingdom, the busy tone is a single 400 Hz tone with equal 0.375 s on/off periods. This was the case even when the UK was still part of the EU. The current 400 Hz/375ms tone was adopted in the mid-to-late 1960s and replaced the older busy tone, which was the same 400 Hz signal but at half the pulse duration, 0.75 s on, 0.75 s off.
The reorder tone, also known as the fast busy tone, or the congestion tone, or all trunks busy (ATB) tone is an audible call progress tone in the public switched telephone network (PSTN) that is returned to a calling party to indicate that the call cannot be processed through the network. [1]
In many cases, when calling from abroad, busy, reorder and other call failure tones may be played by the local switch. Modern signalling protocols like SS7 send this information digitally; thus only a ringback tone or announcement generated by a distant switch in a foreign network will ever be heard by callers from other countries or networks.
Low tone, also busy tone, is defined as having frequency components of 480 and 620 Hz at a level of −24 dBm and a cadence of one half second ON and one half second OFF. Reorder tone, also often called fast busy tone, is the same tone, but with a cadence of 0.25 of a second ON and 0.25 of a second OFF. The original plan had two slightly ...
A dial tone (dialling tone in the UK) is a telephony signal sent by a telephone exchange or private branch exchange (PBX) to a terminating device, such as a telephone, when an off-hook condition is detected. It indicates that the exchange is working and is ready to initiate a telephone call. The tone stops when the first dialed digit is recognized.
In telephone systems, signaling tones are used as call progress tones for in-band indications to subscribers or operators. Certain telephone switching systems used tones, in-band or out-of-band, for signaling on trunks. Typical well-known call progress tones are dial tone, ringing tone, busy tone, and the reorder tone. [1]
A ToneScript syntax may have at most 120 characters. A calling tone may use up to 6 frequency components where <= <=; A cadence section indicates its Duration followed by up to 6 subsections , in parentheses.
If the called station is already busy and cannot accept a second call via call waiting, the calling party is alerted with a busy signal. When the call routing is successful and the receiving telephone is not already in a call, the destination telephone receives an electrical signal, called power ringing, or the ring tone, to alert the recipient ...