Search results
Results from the WOW.Com Content Network
A 500 GB Western Digital hard disk drive with a 16 MB buffer In computer storage , a disk buffer (often ambiguously called a disk cache or a cache buffer ) is the embedded memory in a hard disk drive (HDD) or solid-state drive (SSD) acting as a buffer between the rest of the computer and the physical hard disk platter or flash memory that is ...
Some vendor-specific external drive enclosures (e.g. Maxtor, owned by Seagate since 2006) are known to use HPA to limit the capacity of unknown replacement hard drives installed into the enclosure. When this occurs, the drive may appear to be limited in size (e.g. 128 GB), which can look like a BIOS or dynamic drive overlay (DDO) problem. In ...
The first HDD [11] had an average seek time of about 600 ms. [12] and by the middle 1970s, HDDs were available with seek times of about 25 ms. [13]Some early PC drives used a stepper motor to move the heads, and as a result had seek times as slow as 80–120 ms, but this was quickly improved by voice coil type actuation in the 1980s, reducing seek times to around 20 ms.
The buffer between a serial port and a modem. The COM port speed may be 38400 bit/s while the modem may have only a 14400 bit/s carrier. The integrated disk buffer on a hard disk drive, solid state drive or BD/DVD/CD drive. The integrated SRAM buffer on an Ethernet adapter. [1] The framebuffer on a video card.
Pages in the page cache modified after being brought in are called dirty pages. [5] Since non-dirty pages in the page cache have identical copies in secondary storage (e.g. hard disk drive or solid-state drive), discarding and reusing their space is much quicker than paging out application memory, and is often preferred over flushing the dirty pages into secondary storage and reusing their space.
IBM's first hard drive, the IBM 350, used a stack of fifty 24-inch platters and was of a size comparable to two large refrigerators. In 1962, IBM introduced its model 1311 disk, which used six 14-inch (nominal size) platters in a removable pack and was roughly the size of a washing machine. This became a standard platter size and drive form ...
The search engine that helps you find exactly what you're looking for. Find the most relevant information, video, images, and answers from all across the Web.
For hard disks with 512‑byte sectors, the MBR partition table entries allow a maximum size of 2 TiB (2³² × 512‑bytes) or 2.20 TB (2.20 × 10¹² bytes). [ 1 ] In the late 1990s, Intel developed a new partition table format as part of what eventually became the Unified Extensible Firmware Interface (UEFI).