Search results
Results from the WOW.Com Content Network
Historically, a dual-clutch transmission shifts faster than a standard hydraulic automatic transmission with a torque converter or a single-clutch automated manual transmission. This is possible because the DCT can pre-select the next gear and transfer torque from one clutch to the next clutch with the pre-selected next gear, thus reducing ...
A dual-clutch transmission (DCT) (sometimes referred to as a twin-clutch transmission) is a type of multi-speed vehicle transmission system, that uses two separate clutches for odd and even gear sets. [1] The design is often similar to two separate manual transmissions with their respective clutches contained within one housing, and working as ...
It is marketed variously under the trade names TCT - Twin Clutch Transmission , Euro Twin Clutch Transmission , [2] TCSS - The Twin Clutch System [3] and Dual-Dry-Clutch Auto Transmission . Able to receive torque inputs of up to 350 N⋅m (260 lbf⋅ft), the transmission is the highest-torque transverse dual-dry-clutch application.(2012) [ 4 ...
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
A direct-shift gearbox (DSG, German: Direktschaltgetriebe [1]) [2] [3] is an electronically controlled, dual-clutch, [2] multiple-shaft, automatic gearbox, in either a transaxle or traditional transmission layout (depending on engine/drive configuration), with automated clutch operation, and with fully-automatic [2] or semi-manual gear selection.
The operation of a dual-clutch transmission is analogous to two traditional manual transmissions, each with its own clutch, operating in parallel and alternating shifts. The Ford unit is a six-speed with one clutch acting on reverse, first, third, and fifth gears, and the other used for second, fourth, sixth gears.
A manual transmission requires the driver to operate the gear stick and clutch in order to change gears (unlike an automatic transmission or semi-automatic transmission, where one (typically the clutch) or both of these functions are automated). Most manual transmissions for cars allow the driver to select any gear ratio at any time, for ...
Semi-automatic transmissions were almost exclusively used in motorcycles and are based on conventional manual transmissions or sequential manual transmissions, but use an automatic clutch system. But some semi-automatic transmissions have also been based on standard hydraulic automatic transmissions with torque converters and planetary gearsets ...