Search results
Results from the WOW.Com Content Network
Oldham EX2000 portable explosimeter. An explosimeter is a gas detector which is used to measure the amount of combustible gases present in a sample. When a percentage of the lower explosive limit (LEL) of an atmosphere is exceeded, an alarm signal on the instrument is activated.
This output change is linear, for most gases, up to and beyond 100% LEL, response time is a few seconds to detect alarm levels (around 20% LEL), [1] at least 12% oxygen by volume is needed for the oxidation.
The modern era of gas detection started in 1926–1927 with the development of the catalytic combustion (LEL) sensor by Dr.Oliver Johnson. Dr Johnson was an employee of Standard Oil Company in California (now Chevron), he began research and development on a method to detect combustible mixtures in air to help prevent explosions in fuel storage ...
The term is considered by many safety professionals to be the same as the lower explosive level (LEL). At a concentration in air lower than the LFL, gas mixtures are "too lean" to burn. Methane gas has an LFL of 4.4%. [1] If the atmosphere has less than 4.4% methane, an explosion cannot occur even if a source of ignition is present.
An open path detector usually costs more than a single point detector, so there is little incentive for applications that play to a point detector's strengths: where the point detector can be placed at the known location of the highest gas concentration, and a relatively slow response is acceptable. The open path detector excels in outdoor ...
Download QR code; Print/export Download as PDF; Printable version; In other projects Wikidata item; Appearance. move to sidebar hide ... "Lel", a form of "lol", ...
An evaporative light scattering detector (ELSD) is a destructive chromatography detector, used in conjunction with high-performance liquid chromatography (HPLC), [1] ultra high-performance liquid chromatography (UHPLC), [2] purification liquid chromatography such as flash or preparative chromatography (using a splitter), countercurrent or ...
The E-T secondary electron detector can be used in the SEM's back-scattered electron mode by either turning off the Faraday cage or by applying a negative voltage to the Faraday cage. However, better back-scattered electron images come from dedicated BSE detectors rather than from using the E–T detector as a BSE detector.