Search results
Results from the WOW.Com Content Network
Oil conversion factor from m³ to bbl (or stb) is 6.28981100; Gas conversion factor from standard m³ to scf is 35.314666721; Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units.
Metric regions commonly use the tonne of oil equivalent (toe), or more often million toe (Mtoe). Since this is a measurement of mass, any conversion to barrels of oil equivalent depends on the density of the oil in question, as well as the energy content. Typically 1 tonne of oil has a volume of 1.08 to 1.19 cubic metres (6.8 to 7.5 bbl).
In 1824, these units were replaced with a single system based on the imperial gallon. [a] Originally defined as the volume of 10 pounds (4.54 kg) of distilled water (under certain conditions), [b] then redefined by the Weights and Measures Act 1985 to be exactly 4.546 09 L (277.4 cu in), the imperial gallon is close in size to the old ale gallon.
In contrast, one tonne of crude oil might occupy 6.5 barrels (1,030 litres; 273 US gallons), and one tonne of gasoline will require 7.9 barrels (1,260 litres; 332 US gallons). [20] Overall, the conversion is usually between 6 and 8 barrels (954 and 1,270 litres; 252 and 336 US gallons) per tonne.
kg oil/ha/yr litres oil/ha lbs oil/acre US gal/acre Coldest hardiness zone. Warmest hardiness zone maize (corn) 147 172 129 18 3 11 cashew nut: 148 176 132 19 10 11 oats: 183 217 163 23 3 10 lupin (lupine) 195 232 175 25 4 7 kenaf: 230 273 205 29 6 10 calendula: 256 305 229 33 9 11 cotton: 273 325 244 35 8 11 hemp: 305 363 272 39 8 11 soybean ...
In the oil industry, mud weight is the density of the drilling fluid and is normally measured in pounds per gallon (lb/gal) (ppg) or pound cubic feet (pcf) . [1] In the field it is measured using a mud scale or mud balance. Mud can weigh up to 22 or 23 ppg. A gallon of water typically weighs 8.33 pounds (or 7.48 ppg).
By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.
= 10 parts per million by volume = 10 ppmv = 10 volumes/10 6 volumes NO x molar mass = 46 kg/kmol = 46 g/mol Flow rate of flue gas = 20 cubic metres per minute = 20 m 3 /min The flue gas exits the furnace at 0 °C temperature and 101.325 kPa absolute pressure. The molar volume of a gas at 0 °C temperature and 101.325 kPa is 22.414 m 3 /kmol.