enow.com Web Search

Search results

  1. Results from the WOW.Com Content Network
  2. List of screw and bolt types - Wikipedia

    en.wikipedia.org/wiki/List_of_screw_and_bolt_types

    self-tapping machine screw: A self-tapping machine screw is similar to a machine screw, except the lower part of the shank is designed to cut threads as the screw is driven into an untapped hole. The advantage of this screw type over a self-drilling screw is that, if the screw is reinstalled, new threads are not cut as the screw is driven. set bolt

  3. Magazine (firearms) - Wikipedia

    en.wikipedia.org/wiki/Magazine_(firearms)

    The Japanese Type 11 light machine gun was the only weapon system that used a hopper magazine. This light machine gun was fed by standard 6.5×50mmSR Arisaka stripper clips that were used by riflemen armed with the Type 38 bolt action rifle. The hopper is located on the left side of the receiver and held 6 of the 5-round clips, for a total of ...

  4. Screw - Wikipedia

    en.wikipedia.org/wiki/Screw

    A machine screw or bolt is usually a smaller fastener (less than 1 ⁄ 4 inch (6.35 mm) in diameter) threaded the entire length of its shank that usually has a recessed drive type (slotted, Phillips, etc.), usually intended to screw into a pre-formed thread, either a nut or a threaded (tapped) hole, unlike a wood or self-tapping screw. Machine ...

  5. Closed bolt - Wikipedia

    en.wikipedia.org/wiki/Closed_bolt

    When World War I era machine guns were being tried for use on aircraft, the Lewis gun was found not to be usable with a gun synchronizer for forward firing through the propeller, due to its firing cycle starting with an open bolt. Maxim style arms fired with a cycle starting with a closed bolt, and since the bullet firing from the gun started ...

  6. Glossary of firearms terms - Wikipedia

    en.wikipedia.org/wiki/Glossary_of_firearms_terms

    The M60, a general purpose machine gun. General purpose machine gun: A machine gun intended to fill the role of either a light machine gun or medium machine gun, while at the same time being man-portable. Grain is a unit of measurement of mass that is based upon the mass of a single seed of a typical cereal. Used in firearms to denote the ...

  7. Open bolt - Wikipedia

    en.wikipedia.org/wiki/Open_bolt

    This is a common feature in basic submachine guns like the Sten gun or M3 "Grease Gun", and even some machine guns. With a fixed firing pin, when the bolt is closed gently, without the momentum of the bolt closing at normal speed, there is not enough force imparted to the firing pin to ignite the primer.

  8. Action (firearms) - Wikipedia

    en.wikipedia.org/wiki/Action_(firearms)

    The eccentric screw action first seen on the M1867 Werndl–Holub and later on the Magnum Research Lone Eagle pistol, the breech closure is a rotating drum with the same axis, but offset from the bore. When locked, a firing pin aligns with the primer, the breech is otherwise solid. When rotated open, a slot in the drum is exposed for extraction ...

  9. Firing pin - Wikipedia

    en.wikipedia.org/wiki/Firing_pin

    Simple blowback sub-machine guns that fire from the open-bolt position often have a fixed firing pin that protrudes from the face of the bolt. As the bolt fully closes on the breech the primer of the newly chambered round is struck, causing the cartridge to fire. The Owen and F1 submachine gun are examples