Search results
Results from the WOW.Com Content Network
DIMM modules connect to the computer via a 64-bit-wide interface. Some other computer architectures use different modules with a different bus width. In a single-channel configuration, only one module at a time can transfer information to the CPU.
8-bit cyclic redundancy check byte (generator: x 8 +x 7 +x 4 +x 3 +x+1) Recipients acknowledge such a command with a single acknowledge byte 0x00 (received correctly) or 0xff (received incorrectly). Slaves follow their acknowledge byte with a reply of a length byte and 0–16 data bytes plus CRC, which the receiving master in turn confirms with ...
2Wire produces a series of residential gateways under the HomePortal name that enable home networking with interfaces that range from ADSL 2+ to fiber to the node (VDSL 1 and 2), as well as FTTP. The gateways are based on integrated system-on-a-chip architectures, and have native TR-069 support, as well as support for HomePNA , MoCA , USB , 802 ...
The 64-bit PCI connector can be distinguished from a 32-bit connector by the additional 64-bit segment. Memory transactions between 64-bit devices may use all 64 bits to double the data transfer rate. Non-memory transactions (including configuration and I/O space accesses) may not use the 64-bit extension.
PC Card is a parallel peripheral interface for laptop computers and PDAs. [1] The PCMCIA originally introduced the 16-bit ISA-based PCMCIA Card in 1990, but renamed it to PC Card in March 1995 to avoid confusion with the name of the organization. [2]
Today, few consumer-grade PC-compatible computers include COM ports, [3] though some of them do still include a COM header on the motherboard. [ 4 ] After the RS-232 COM port was removed from most consumer-grade computers, an external USB-to-UART serial adapter cable was used to compensate for the loss.
Examples of computer connector sockets on various laptops Ports on the back of the Apple Mac Mini (2005). A computer port is a hardware piece on a computer where an electrical connector can be plugged to link the device to external devices, such as another computer, a peripheral device or network equipment. [1]
On a parallel SCSI bus, a device (e.g. host adapter, disk drive) is identified by a "SCSI ID", which is a number in the range 0–7 on a narrow bus and in the range 0–15 on a wide bus. On earlier models a physical jumper or switch controls the SCSI ID of the initiator (host adapter).