Search results
Results from the WOW.Com Content Network
The thickness of gold plating on jewellery is noted in microns (or micro-meters). The microns of thickness determines how long the gold plating lasts with usage. The jewellery industry denotes different qualities of gold plating in the following terminology Gold flashed / Gold washed - gold layer thickness less than 0.5 micron
A surface plating of blue gold on karat gold or sterling silver can be achieved by a gold plating of the surface, followed by indium plating, with layer thickness matching the 1:2 atomic ratio. A heat treatment then causes interdiffusion of the metals and formation of the required intermetallic compound.
Help; Learn to edit; Community portal; Recent changes; Upload file; Special pages
AuAl 2 is the most thermally stable species of the Au–Al intermetallic compounds, with a melting point of 1060 °C (see phase diagram), which is similar to the melting point of pure gold. AuAl 2 can react with Au, therefore is often replaced by Au 2 Al, a tan-colored substance, which forms at composition of 93% of Au and 7% of Al by mass.
The layer of gold on gold-filled items is 5 to 10 times thicker than that produced by regular gold plating, and 15 to 25 times thicker than that produced by gold electroplate (sometimes stamped HGE for "high grade electroplate" or HGP for "heavy gold plate", though neither of these terms have any legal meaning, and indicate only that the item ...
The formula was meant to be dissolved in water at the concentration of 9.0 g/L, giving a bath with pH = 1.5. It yielded a light gold color after 1 min, and a golden-brown film after 3 min. The average thickness ranged between 200 and 1000 nm. [6] Iridite 14-2 is a chromate conversion bath for aluminum.
Electroless nickel immersion gold (ENIG or ENi/IAu), also known as immersion gold (Au), chemical Ni/Au or soft gold, is a metal plating process used in the manufacture of printed circuit boards (PCBs), to avoid oxidation and improve the solderability of copper contacts and plated through-holes.
The processed surface is then coated with electroless copper or nickel before further plating. This process gives useful (about 1 to 6 kgf /cm or 10 to 60 N /cm or 5 to 35 lbf /in) adhesion force, but is much weaker than actual metal-to-metal adhesion strength.