Search results
Results from the WOW.Com Content Network
2800 L/s 2nd magnitude: 10 to 100 ft 3 /s: 280 to 2800 L/s 3rd magnitude: 1 to 10 ft 3 /s: 28 to 280 L/s 4th magnitude: 100 US gal/min to 1 ft 3 /s (448 US gal/min) 6.3 to 28 L/s 5th magnitude: 10 to 100 gal/min: 0.63 to 6.3 L/s 6th magnitude: 1 to 10 gal/min: 63 to 630 mL/s 7th magnitude: 1 pint to 1 gal/min: 8 to 63 mL/s 8th magnitude: Less ...
A record peak flow from the spring on April 11, 1973, was measured at 14,324 US gallons (54.22 m 3) per second – equal to 1.24 billion US gal (4.68 million m 3; 3,800 acre⋅ft) per day. The Floridan aquifer system is composed of two main aquifers: the Upper Floridan aquifer and the Lower Floridan aquifer.
The relationship between gallons per minute (gpm) and fixture unit is not constant, but varies with the number of fixture units. For example, 1000 FU is equivalent to 220 US gallons per minute (0.014 m 3 /s) while 2000 FU represents only 330 US gallons per minute (0.021 m 3 /s), about 1.5 times the flow rate.
Volumetric flow rate is defined by the limit [3] = ˙ = =, that is, the flow of volume of fluid V through a surface per unit time t.. Since this is only the time derivative of volume, a scalar quantity, the volumetric flow rate is also a scalar quantity.
The core of the fountain was an array of 40 jets arranged in a 6-foot (1.8 m) diameter circle around 16 lights capable of throwing water 30 ft (9.1 m) in the air; there were two larger concentric rings with smaller jets outside the core. The total combined flowrate of all the nozzles was 9,000 US gal/min (570 L/s). [3]
With C v = 1.0 and 200 psia inlet pressure, the flow is 100 standard cubic feet per minute (scfm). The flow is proportional to the absolute inlet pressure, so the flow in scfm would equal the C v flow coefficient if the inlet pressure were reduced to 2 psia and the outlet were connected to a vacuum with less than 1 psi absolute pressure (1.0 ...
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
For liquids, various units are used depending upon the application and industry, but might include gallons (U.S. or imperial) per minute, liters per second, liters per m 2 per hour, bushels per minute or, when describing river flows, cumecs (cubic meters per second) or acre-feet per day.