Search results
Results from the WOW.Com Content Network
The fuel factor, f o, is the ratio of created CO 2 to depleted oxygen in a combustion reaction, used to check the accuracy of an emission measurement system. [1] It can be calculated using the equation f o = (20.9 - %O 2)/%CO 2,
Oil conversion factor from m³ to bbl (or stb) is 6.28981100 Gas conversion factor from standard m³ to scf is 35.314666721 Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units.
A diesel cycle engine can be as much as 40% to 50% efficient at converting fuel into work, [2] where a typical automotive gasoline engine's efficiency is about 25% to 30%. [3] [4] In general, an engine is designed to run on a single fuel source and substituting one fuel for another may affect the thermal efficiency.
Due to the higher density, diesel fuel offers a higher volumetric energy density: the density of EN 590 diesel fuel is defined as 0.820 to 0.845 kg/L (6.84 to 7.05 lb/US gal) at 15 °C (59 °F), about 9.0-13.9% more than EN 228 gasoline (petrol)'s 0.720–0.775 kg/L (6.01–6.47 lb/US gal) at 15 °C, which should be put into consideration when ...
The cost of conversion may be justified in areas where aviation gasoline costs significantly more than jet fuel, and by the fact that the diesel fuel flow at cruise is about 10 gallons (38 litres) per hour, compared to about 13.5 gallons (51 litres) per hour with the original engine.
The dual-fuel ferry has more car capacity but requires larger engines which also emit methane, a greenhouse gas with a far greater global warming effect than CO2.
Since this is a measurement of mass, any conversion to barrels of oil equivalent depends on the density of the oil in question, as well as the energy content. Typically 1 tonne of oil has a volume of 1.08 to 1.19 cubic metres (6.8 to 7.5 bbl).
Petroleum refinery in Anacortes, Washington, United States. Petroleum refining processes are the chemical engineering processes and other facilities used in petroleum refineries (also referred to as oil refineries) to transform crude oil into useful products such as liquefied petroleum gas (LPG), gasoline or petrol, kerosene, jet fuel, diesel oil and fuel oils.