Search results
Results from the WOW.Com Content Network
Akebono Brake Industry Co., Ltd. (曙ブレーキ工業, Akebono Burēki Kōgyō) is a Japanese manufacturer of brake components for automobiles, motorcycles, trains, and industrial machinery. The company was founded by Sanji Osame in 1929 as Akebono Sekimen Kogyosho as a response to the demand by the Japan Army Authority for ground transport ...
A brake bleed screw is normally mounted at the highest point on each cylinder or caliper. There are five main methods of bleeding: [1] The pump and hold method, the brake pedal is pressed while one bleed screw at a time is opened, allowing air to escape. The bleed screw must be closed before releasing the pedal, or a one-way valve must be fitted.
When the brakes are hydraulically applied, the caliper clamps or squeezes the two pads together onto the spinning rotor to slow and stop the vehicle. When a brake pad heats up due to contact with the rotor , it transfers small amounts of its friction material onto the disc, leaving a dull grey coating on it.
Some disc brakes are drilled or slotted, but smooth discs show no more fade. Long dual-tire skid marks on highways, made by trucks with drum brakes, are visible examples of non-linearity between brake response and pedal pressure. Large trucks still use drum brakes because they are economical and fit easily where an equivalent disc brake does not.
An exhaust brake is a valve which essentially creates a back-pressure in the exhaust system, which applies enough force onto the engine's pistons to slow the engine. In most cases, an exhaust brake is so effective that it can slow a heavily-loaded vehicle on a downgrade without ever applying the vehicle’s service brakes.
An inboard brake is an automobile technology wherein the disc brakes are mounted on the chassis of the vehicle, rather than directly on the wheel hubs. Its main advantages are twofold: a reduction in the unsprung weight of the wheel hubs, as this no longer includes the brake discs and calipers; and braking torque is applied directly to the chassis, rather than being transferred to it through ...
SpeedE, an academic concept car developed for studying drive-by-wire technologies such as brake-by-wire. Brake-by-wire technology in the automotive industry is the ability to control brakes through electronic means, without a mechanical connection that transfers force to the physical braking system from a driver input apparatus such as a pedal or lever.
Disk electromagnetic brakes are used on vehicles such as trains, and power tools such as circular saws, to stop the blade quickly when the power is turned off.A disk eddy current brake consists of a conductive non-ferromagnetic metal disc attached to the axle of the vehicle's wheel, with an electromagnet located with its poles on each side of the disk, so the magnetic field passes through the ...