Ad
related to: adsl vs gpon 2 1/2 x 3
Search results
Results from the WOW.Com Content Network
GPON networks have now been deployed in numerous networks across the globe, and the trends indicate higher growth in GPON than other PON technologies. G.987 defined 10G-PON in 2010 [15] with 10 Gbit/s downstream and 2.5 Gbit/s upstream – framing is "G-PON like" and designed to coexist with GPON devices on the same network. [16]
G.984.6 : Reach extension (2008), with amendments 1 (2009) and 2 (2012) [12] G.984.7 : Long reach (2010) [13] The GPON OMCI recommendation G.984.4 draws on G.983.2, which defines the BPON management model. However, G.984.4 removed all references to ATM. G.988 is a stand-alone OMCI recommendation and supersedes G.984.4 except for GPON specifics ...
ADSL initially existed in two versions (similar to VDSL), namely CAP and DMT. CAP was the de facto standard for ADSL deployments up until 1996, deployed in 90 percent of ADSL installations at the time. However, DMT was chosen for the first ITU-T ADSL standards, G.992.1 and G.992.2 (also called G.dmt and G.lite respectively). Therefore, all ...
Asymmetric 10G-PON is specified as XG-PON1: 10 Gbit/s downstream and 2.5 Gbit/s upstream (nominal line rate of 9.95328 Gbit/s downstream and 2.48832 Gbit/s upstream). Symmetric 10G-PON is also proposed as XG-PON2 with 10 Gbit/s upstream, but would require more expensive burst-mode lasers on optical network terminals (ONTs) to deliver the ...
G.fast is a digital subscriber line (DSL) protocol standard for local loops shorter than 500 meters, with performance targets between 100 Mbit/s and 1 Gbit/s, depending on loop length. [1] High speeds are only achieved over very short loops.
2 1 0 0 0 0 0 0 OTU2 10 10.7 Transports an OC-192, STM-64 or wide area network (WAN) physical layer (PHY) for 10 Gigabit Ethernet (10GBASE-W) 8 4 1 0 0 0 0 0 OTU2e [4] 10.5 11.1 Transports a 10 Gigabit Ethernet local area network (LAN) PHY coming from IP/Ethernet switches and routers at full line rate (10.3 Gbit/s). This is specified in G.Sup43 ...
G.992.5 (also referred to as ADSL2+, G.dmt.bis+, and G.adslplus) [1] is an ITU-T standard for asymmetric digital subscriber line (ADSL) broadband Internet access. The standard has a maximum theoretical downstream sync speed of 24 megabits per second (Mbit/s). Utilizing G.992.5 Annex M upstream sync speeds of 3.3 Mbit/s can be achieved.
ITU G.992.3 is an ITU (International Telecommunication Union) standard, also referred to as ADSL2 or G.dmt.bis.It optionally extends the capability of basic ADSL in data rates to 12 Mbit/s downstream and, depending on Annex version, up to 3.5 Mbit/s upstream (with a mandatory capability of ADSL2 transceivers of 8 Mbit/s downstream and 800 kbit/s upstream). [1]
Ad
related to: adsl vs gpon 2 1/2 x 3