Search results
Results from the WOW.Com Content Network
Blow molding (or moulding) is a manufacturing process for forming hollow plastic parts. It is also used for forming glass bottles or other hollow shapes. In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and injection stretch blow molding. The blow molding process begins with softening ...
Injection moulding (U.S. spelling: injection molding) is a manufacturing process for producing parts by injecting molten material into a mould, or mold. Injection moulding can be performed with a host of materials mainly including metals (for which the process is called die-casting ), glasses, elastomers, confections, and most commonly ...
Injection mold construction. Injection mold construction is the process of creating molds that are used to perform injection molding operations using an injection molding machine. These are generally used to produce plastic parts using a core and a cavity. Molds are designed as two-plate or three-plate molds, depending on the type of component ...
The basic concept of the gas-assisted molding process is quite similar to the regular injection molding process. In gas-assisted molding, the plastic material is injected into the mold cavities like the regular injection molding process but only up to 70%~80% of the mold volume. The melted plastic in contact with the mold walls begins to ...
Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, while heat and pressure are maintained until the molding material has cured; this process is known as compression molding ...
A injection molding machine with a robot. An injection molding machine (also spelled as injection moulding machine in BrE ), also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit. [1]
This not only helps molding but also reduces stress concentration. It is recommended that the radius at base of hole in boss should be 0.25 to 0.5 times the nominal wall thickness. Minimum draft for boss inner and outer diameter: An appropriate draft on the outer diameter of a boss helps easy ejection from the mold. Draft is required on the ...
Hot runner. A hot runner system is an assembly of heated components used in plastic injection molds that inject molten plastic into the cavities of the mold. (The cavities are the part of the mold shaped like the parts to be produced.) By contrast, a cold runner is simply a channel formed between the two halves of the mold, for the purpose of ...