Ads
related to: welding leads cables arc welder
Search results
Results from the WOW.Com Content Network
Gas metal arc welding (GMAW), commonly called MIG (for metal/inert-gas), is a semi-automatic or automatic welding process with a continuously fed consumable wire acting as both electrode and filler metal, along with an inert or semi-inert shielding gas flowed around the wire to protect the weld site from contamination.
Shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding [1] or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
Spray transfer GMAW. Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) and metal active gas (MAG) is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to fuse (melt and join).
Flux-cored arc welding (FCAW or FCA) is a semi-automatic or automatic arc welding process. FCAW requires a continuously-fed consumable tubular electrode containing a flux and a constant- voltage or, less commonly, a constant- current welding power supply .
GTAW weld area. Manual gas tungsten arc welding is a relatively difficult welding method, due to the coordination required by the welder. Similar to torch welding, GTAW normally requires two hands, since most applications require that the welder manually feed a filler metal into the weld area with one hand while manipulating the welding torch in the other.
The flux powder is supplied by the hopper on the left hand side, then follow three filler wire guns and finally a vacuum cleaner. A submerged arc welder used for training Close-up view of the control panel A schematic of submerged arc welding Pieces of slag from submerged arc welding exhibiting glassy surface due to silica (SiO 2).
Ads
related to: welding leads cables arc welder