Ads
related to: shell oil equivalent chart 1 1/2 gal 1 2 gal shop vac
Search results
Results from the WOW.Com Content Network
Metric regions commonly use the tonne of oil equivalent (toe), or more often million toe (Mtoe). Since this is a measurement of mass, any conversion to barrels of oil equivalent depends on the density of the oil in question, as well as the energy content. Typically 1 tonne of oil has a volume of 1.08 to 1.19 cubic metres (6.8 to 7.5 bbl).
A RAND study in 2005 estimated that production of 100,000 barrels per day (16,000 m 3 /d) of oil (5.4 million tons/year) would theoretically require a dedicated power generating capacity of 1.2 gigawatts (10 billion kWh/year), assuming deposit richness of 25 US gallons (95 L; 21 imp gal) per ton, with 100% pyrolysis efficiency, and 100% extraction of pyrolysis products. [1]
1.5 US gallons (5.7 litres) of ethanol has the same energy content as 1.0 US gal (3.8 L) of gasoline. The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above)
Shell was responsible for an 88,200-gallon oil spill in the Gulf of Mexico in May 2016. [247] Two ruptures in a Shell Oil Co. pipeline in Altamont, California – one in September 2015 and another in May 2016 – led to questions on whether the Office of the State Fire Marshal, charged with overseeing the pipeline, was doing an adequate job. [248]
According to the American Petroleum Institute (API), a standard barrel of oil is the amount of oil that would occupy a volume of exactly 1 barrel (158.99 L) at reference temperature and pressure conditions of 60 °F (15.6 °C) and 14.696 psi (1,013.25 hPa) (or 1 atm). This standard barrel of oil will occupy a different volume at different ...
Most shell-and-tube heat exchangers are either 1, 2, or 4 pass designs on the tube side. This refers to the number of times the fluid in the tubes passes through the fluid in the shell. In a single pass heat exchanger, the fluid goes in one end of each tube and out the other.
In the engine oil family, there are four basic oil sub-families: Multigrade conventional oil—in SAE 10W-30 and 15W-40 viscosity ranges; Multigrade synthetic oil—in SAE 5W-40 and 15w-40 viscosity ranges [3] Single grade conventional oil—in SAE 20, 30, 40 and 50; Synthetic blend oil
The oil is dyed blue to make it easier to recognize in the gasoline. It appears black in this bottle because it is not diluted. Two-stroke oil (also referred to as two-cycle oil, 2-cycle oil, 2T oil, or 2-stroke oil) is a special type of motor oil intended for use in crankcase compression two-stroke engines, typical of small gasoline-powered ...
Ads
related to: shell oil equivalent chart 1 1/2 gal 1 2 gal shop vac