enow.com Web Search

  1. Ads

    related to: 4 ohm 18 inch subwoofer

Search results

  1. Results from the WOW.Com Content Network
  2. JL Audio - Wikipedia

    en.wikipedia.org/wiki/JL_Audio

    W7: JL's top-of-the-line subwoofer featuring six now expired, patented technologies. Available in 8-inch, 10-inch, 12-inch, and 13.5-inch woofer sizes. TW5: JL's only shallow mount subwoofer and only available in 13.5-inch. The mounting depth is a mere 2.54 inches. This subwoofer features 3-ohm nominal impedance and has an RMS of 600 W. Easily ...

  3. Subwoofer - Wikipedia

    en.wikipedia.org/wiki/Subwoofer

    The horn-loaded subwoofers each have a floor mouth that is 2.2 square meters (24 sq ft), and a horn length that is 9.5 meters (31 ft), in a cavity 1 meter (3 ft 3 in) under the floor of the listening room. Each subwoofer is driven by eight 18-inch subwoofer drivers with 100 millimeters (3.9 in) voice coils.

  4. Thiele/Small parameters - Wikipedia

    en.wikipedia.org/wiki/Thiele/Small_parameters

    American EIA standard RS-299A specifies that (or DCR) should be at least 80% of the rated driver impedance, so an 8-ohm rated driver should have a DC resistance of at least 6.4 ohms, and a 4-ohm unit should measure 3.2 ohms minimum. This standard is voluntary, and many 8-ohm drivers have resistances of ≈5.5 ohms, and proportionally lower for ...

  5. Linn Isobarik - Wikipedia

    en.wikipedia.org/wiki/Linn_Isobarik

    This 2-way, 4-ohm, design was a physically much smaller product – measuring 425 × 332 × 244 mm (16.7 × 13.1 × 9.6 in) – that required tall speaker stands. Launched in 1978, it was Linn's entry-level loudspeaker until the Kan (a non-isobaric bookshelf speaker using the same Linn D20-LP-1 and KEF B110 drive units as its big brother) was ...

  6. Constant-voltage speaker system - Wikipedia

    en.wikipedia.org/wiki/Constant-voltage_speaker...

    These are robust, purpose-built amplifiers with many application-specific design features such as overcurrent protection and aggressive high-pass filtering for flyback voltage protection. Some models can be configured so that one channel drives one or two low impedance 8-ohm speakers while the other drives a constant-voltage string of speakers. [3]

  7. Peavey Electronics - Wikipedia

    en.wikipedia.org/wiki/Peavey_Electronics

    The power rating has gradually increased over time, and current model Bandits are rated at 80 watts RMS into 8 ohms, and 100 watts RMS into 4 ohms. In the mid-1990s, the Bandit was used to introduce Peavey's proprietary TransTube circuitry, a solid-state technology aimed at emulating the sound of tube amplifiers . [ 9 ]

  1. Ads

    related to: 4 ohm 18 inch subwoofer