Search results
Results from the WOW.Com Content Network
The resolution of 960H depends on whether the equipment is PAL or NTSC based: 960H represents 960 x 576 (PAL) or 960 x 480 (NTSC) pixels. [29] 960H represents an increase in pixels of some 30% over standard D1 resolution, which is 720 x 576 pixels (PAL), or 720 x 480 pixels (NTSC). The increased resolution over D1 comes as a result of a longer ...
Early 1440p computer displays became commonly available in 2010. Dell's UltraSharp U2711 monitor was released in 2010 as WQHD, with a 1440p widescreen. [1] The 27-inch Apple LED Cinema Display released in 2010 also had a native resolution of 2560 × 1440, as did the Apple Thunderbolt Display which was sold from July 2011 to June 2016.
The second-generation Macintosh, launched in 1987, came with colour (and greyscale) capability as standard, at two levels, depending on monitor size—512×384 (1/4 of the later XGA standard) on a 12" (4:3) colour or greyscale (monochrome) monitor; 640×480 with a larger (13" or 14") high-resolution monitor (superficially similar to VGA, but at ...
The resolution 3440 × 1440 is equivalent to QHD (2560 × 1440) extended in width by 34%, giving it an aspect ratio of 43:18 (2.3 8:1, or 21.5:9; commonly marketed as simply "21:9"). The first monitor to support this resolution was the 34-inch LG 34UM95-P. [ 33 ] This monitor was first released in Germany in late December 2013, before being ...
It is used for multiple anamorphic formats and DCI 1024:429 (21. 482517:9), but also for ultrawide computer monitors, including 43:18 (21 1 ⁄ 2:9) for resolutions based on 720 lines and 12:5 (21 3 ⁄ 5:9) for ultrawide variants of resolutions based either on 960 pixels width or 900 lines height.
Since 2014, a number of high-end desktop monitors have been released that use ultrawide displays with aspect ratios that roughly match the various anamorphic formats used in film, but are commonly marketed as 21:9. [22] [23] [7] Resolutions for such displays include 2560×1080 (64:27), 3440×1440 (43:18) and 3840×1600 (12:5). [24] [25]
The apparent PPI of a monitor depends upon the screen resolution (that is, the number of pixels) and the size of the screen in use; a monitor in 800×600 mode has a lower PPI than does the same monitor in a 1024×768 or 1280×960 mode. The dot pitch of a computer display determines the absolute limit of possible pixel density.
The monitor only supported DisplayPort version 1.2, which is limited to 5120 × 2880 at 30 Hz. To work around this, the UP2715K implemented a system by which the bandwidth of two DisplayPort connections could be combined to achieve 60 Hz, using a picture-by-picture mode to virtually treat the display as two smaller 2560 × 2880 monitors side-by ...