Search results
Results from the WOW.Com Content Network
There are discernible differences between the GM and Ram versions, evident in the gaskets used and the axle cover designs. The GM AAM axle tubes exhibit a smaller diameter at the spindle compared to the AAM Dodge axles—measuring 4" for GM and 3.5" for Dodge from the housing. In design variation, newer GM trucks are aligned with Dodge axles.
Fox 34, travel 120-140mm for cross country and light trail use Fox 36, travel 150-160mm for trail and enduro use Fox 38, travel 160-180mm for hard enduro use Fox 40, travel 203mm for downhill use (only dual crown fork) As of January 2025 the available rear shocks are: Fox Float SL, for cross country use Fox Float, for trail and cross country use
The front beam axle was mounted on leaf springs, the rear tandem beam axles were mounted on a leaf sprung "walking beam" type suspension. All models shared a 181 inches (4.60 m) wheelbase (measured from the 1st to the 3rd axles). Full air drum brakes were used. The M123 was able to control the trailer brakes independently of the tractor.
Although this axle is designed for medium-duty, commercial-trucks, Ford did put the S110 in 2008-2010 & 2015-2016 F-450 Pick up trucks. The Dana S110 has a GAWR up to 14,706 lbs but is frequently, de-rated by vehicle manufacturer for safety and tire reasons. This axle is not used in 1 Ton trucks . Dana S110 in a 2008 Ford F-450 Cab/Chassis
The AAM 9.25 solid axle was developed for 3rd generation Dodge Rams (3/4 and 1 Ton). The axle uses a modified Saginaw 9.5 differential, ring and pinion. The differential housing covers are identical except for one bolt hole at the 3 o’clock position. Model year 2010 and later Rams use larger universal joints than the 2003-2009 models. [1]
The Fox platform, like most compact and mid-size cars of the late 1970s, was designed with a rear-wheel drive layout. In contrast to the full-size Fords and Mercurys of the time, the Fox platform used unibody construction. The Fox platform used MacPherson strut front suspension, continuing the use of a live rear axle suspension configuration. [12]
The Sterling 10.5 axle is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in model year 1985 Ford trucks. The axle was developed to replace the Dana 60 and Dana 70. The Sterling 10.5 axle is currently only made as a full floating axle.
The Dana/Spicer model 53 is an automotive rear axle produced by Dana-Spicer used in medium to heavy duty truck applications. The Dana/Spicer model 53 (Dana 53) is a semi-float axle that was produced from 1947–1965, [1] both with a 53 differential and wheel ends, and with a Dana 44 differential and Dana 53 wheel ends.