Search results
Results from the WOW.Com Content Network
A nail gun, nailgun or nailer is a form of hammer used to drive nails into wood or other materials. It is usually driven by compressed air ( pneumatic ), electromagnetism , highly flammable gases such as butane or propane , or, for powder-actuated tools , a small explosive charge .
A larger number indicates a longer nail, shown in the table below. Diameter of the nail also varies based on penny size, depending on nail type. Nails under 1 + 1 ⁄ 4 inch, often called brads, are sold mostly in small packages with only a length designation or with length and wire gauge designations; for example, 1″ 18 ga. or 3 ⁄ 4 ″ 16 ga.
Nails are made in a great variety of forms for specialized purposes. The most common is a wire nail. [2] Other types of nails include pins, tacks, brads, spikes, and cleats. Nails are typically driven into the workpiece by a hammer or nail gun. A nail holds materials together by friction in the axial direction and shear strength
A Paslode nail gun. Paslode Impulse is a trademarked name for a cordless nail gun manufactured by Paslode.Cordless nail guns do not need an air compressor.Instead, they use what Paslode calls a "fuel cell", but is actually a very small two stroke engine which fires one ignition stroke for each nail driven, and reloads itself from a small metal can filled with pressurized flammable gas (a ...
The colored straws in the tray contain cartridges that are loaded singly into the tool. Also visible are 75 mm hardened steel nails with 8 mm heads. Powder actuated tools can be variously classified: Direct acting (the charge acts directly on the head of the nail or high velocity), or indirect (using an intermediate piston or low velocity)
In 1940, Paslode created the first Stapling Hammer. In 1959, the world's first Pneumatic nailer. By 1986, they had created the Impulse range of gas actuated nailing systems, commonly referred to as a nail gun. In 1986, ITW (Illinois Tool Works) acquired Paslode. The PASLODE brand joined the SPIT company in France in 2002.
Available in 20-gauge or .410-bore/.45 Colt only. These single-shot guns have either a blued finish or an electroless nickel finish with a full-length thumb-hole polymer stock. The right side of the stock is open with storage for three 20-gauge or four .410-bore shotgun shells. It also has ejectors that automatically expel spent shells.
Staple guns do not have backing anvils and are exclusively used for tacking (with the exception of outward-clinch staplers used for fastening duct insulation). They typically have staples made from thicker metal. Some staple guns use arched staples for fastening small cables, e.g. phone or cable TV, without damaging the cable.