Search results
Results from the WOW.Com Content Network
For freshwater aquaria, gravel is the most common substrate. To prevent damage to fish, gravel should not be sharp. Aquarium gravel can be as coarse as pea-sized or as fine as 1–2 mm. [1] It is available in a number of colors, and may be naturally colored or dyed, and may have a polymer seal to ensure it does not affect water chemistry. [1]
Synthetic polymers began replacing other chemical binders for soil stabilization in agriculture in the late 20th century. [1] Compared to traditional chemical binders, polymer soil additives can achieve the same amount of strengthening at much lower concentrations – for example, mixtures of 0.5-1% of various biopolymers have strength levels that match or exceed those of 10% cement mixtures ...
Marine clay is a particle of soil that is dedicated to a particle size class, this is usually associated with USDA's classification with sand at 0.05mm, silt at 0.05-.002mm and clay being less than 0.002 mm in diameter.
Expansive clay is a clay soil that is prone to large volume changes (swelling and shrinking) that are directly related to changes in water content. [1] Soils with a high content of expansive minerals can form deep cracks in drier seasons or years; such soils are called vertisols .
Marl has been used as a soil conditioner and neutralizing agent for acid soil [13] [17] and in the manufacture of Portland cement. [18] Because some marls have a very low permeability , they have been exploited for construction of the Channel Tunnel between England and France and are being investigated for the storage of nuclear waste .
Clay is generally considered undesirable for agriculture, although some amount of clay is a necessary component of good soil. Compared to other soils, clay soils are less suitable for crops due to their tendency to retain water, and require artificial drainage and tillage to make suitable for planting.
Thus, the boundary between each state can be defined based on a change in the soil's behavior. The Atterberg limits can be used to distinguish between silt and clay and to distinguish between different types of silts and clays. The water content at which soil changes from one state to the other is known as consistency limits, or Atterberg's limit.
This is done to break the capillary pores in the soil to prevent water reaching the surface of the soil. Clay soils in high annual rain fall (more than 100 cm) areas do not generally suffer from high alkalinity as the rain water runoff is able to reduce/leach the soil salts to comfortable levels if proper rainwater harvesting methods are ...