Search results
Results from the WOW.Com Content Network
The RF bandwidth of an AM transmission (refer to figure 2, but only considering positive frequencies) is twice the bandwidth of the modulating (or "baseband") signal, since the upper and lower sidebands around the carrier frequency each have a bandwidth as wide as the highest modulating frequency. Although the bandwidth of an AM signal is ...
Most amateur digital modes are transmitted by inserting audio into the microphone input of a radio and using an analog scheme, such as amplitude modulation (AM), frequency modulation (FM), or single-sideband modulation (SSB). Amateur teleprinting over radio (AMTOR) D-STAR (Digital Data) a high speed (128 kbit/s), data-only mode.
AM broadcasts are used on several frequency bands. The allocation of these bands is governed by the ITU's Radio Regulations and, on the national level, by each country's telecommunications administration (the FCC in the U.S., for example) subject to international agreements. The frequency ranges given here are those that are allocated to stations.
The bandwidth of an FM transmission is given by the Carson bandwidth rule which is the sum of twice the maximum deviation and twice the maximum modulating frequency. For a transmission that includes RDS this would be 2 × 75 kHz + 2 × 60 kHz = 270 kHz .
In the Americas (defined as International Telecommunication Union (ITU) region 2), the FM broadcast band consists of 101 channels, each 200 kHz wide, in the frequency range from 87.8 to 108.0 MHz, with "center frequencies" running from 87.9 MHz to 107.9 MHz. For most purposes an FM station is associated with its center frequency.
In broadcast services, where audio fidelity is important, wideband FM is generally used. Analog TV sound is also broadcast using FM. Narrowband FM is used for voice communications in commercial and amateur radio settings. In two-way radio, narrowband FM (NBFM) is used to conserve bandwidth for land mobile, marine mobile and other radio services.
Typical mast radiator of a commercial medium wave AM broadcasting station, Chapel Hill, North Carolina, U.S. Medium wave (MW) is a part of the medium frequency (MF) radio band used mainly for AM radio broadcasting. The spectrum provides about 120 channels with more limited sound quality than FM stations on the FM broadcast band. During the ...
Standard time frequencies can be heard here. VHF low 54–88 MHz: vestigial sideband modulation for analog video, and FM for analog audio; 8-VSB or OFDM for digital broadcast very high frequency (VHF) band I: Channels 2 through 6 are from 54–88 MHz (except 72–76 MHz). FM radio: 87.5–108 MHz, 76–90 MHz in Japan Frequency Modulation (FM)