Search results
Results from the WOW.Com Content Network
Engineered lumber can be cut to length and installed much like sawn lumber; the flitch requires shop fabrication and/or field bolting. This, coupled with a much increased self-weight of the beam (11.4 pounds (5.2 kg) for engineered wood vs. 25.2 pounds (11.4 kg) for a flitch beam), decreases the viability of the system.
Per-kilogram prices of some synthetic radioisotopes range to trillions of dollars. ... per mass of element contained. This implicitly puts the value of compounds ...
A common hardwood, red oak, has an energy content of 14.9 mega joules per kilogram (6,388 BTU per pound), and 10.4 mega joules recoverable if burned at 70% efficiency. [ 5 ] The Sustainable Energy Development Office (SEDO), part of the Government of Western Australia states that the energy content of wood is 16.2 megajoules per kilogram (4.5 ...
The energy content, then, is approximately 3.5–4.5kWh/kg (~150–250 kg/cubic metre). [32] Coal power plants have been converted to run on woodchips, which is fairly straightforward to do, since they both use an identical steam turbine heat engine, and the cost of woodchip fuel is comparable to coal. [32]
conversion combination output units Metric: kilogram per cubic metre: kg/m3 kg/m 3: 1.0 kg/m 3 (1.7 lb/cu yd) kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd) gram per cubic metre: g/m3 g/m 3: 1.0 g/m 3 (0.0017 lb/cu yd) g/m3 kg/m3; g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb/yd3 (g/cm3 lb/cuyd) Imperial & US customary: pound per cubic foot ...
Treated pilings are available in chromated copper arsenate retentions of 0.60, 0.80 and 2.50 pounds per cubic foot (9.6, 12.8 and 40.0 kg/m 3) if treatment is required. Historical Chinese construction
The American Wood Protection Association (AWPA) standards for PTI require a retention of 0.018 lb/cu ft (0.29 kg/m 3) for above ground use and 0.013 lb/cu ft (0.21 kg/m 3) when applied in combination with a wax stabilizer. The AWPA has not developed a standard for a PTI ground contact preservative, so PTI is currently limited to above ground ...
Per the New Hampshire Office of Energy and Planning release on Fuel Prices updated on 5 Oct 2015, the cost of #2 fuel oil delivered can be compared to the cost of Bulk Delivered Wood Fuel Pellets using their BTU equivalent: 1 ton pellets = 118.97 gallon of #2 Fuel Oil. This assumes that one ton of pellets produces 16,500,000 BTU and one gallon ...