Search results
Results from the WOW.Com Content Network
Temperatures are recorded along the optical sensor cable, thus not at points, but as a continuous profile. A high accuracy of temperature determination is achieved over great distances. Typically the DTS systems can locate the temperature to a spatial resolution of 1 m with accuracy to within ±1 °C at a resolution of 0.01 °C.
An exhaust gas temperature gauge (EGT gauge or EGT sensor) is a meter used to monitor the exhaust gas temperature of an internal combustion engine in conjunction with a thermocouple-type pyrometer. EGT gauges are found in certain cars and aeroplanes. By monitoring EGT, the driver or pilot can get an idea of the vehicle's air-fuel ratio (AFR).
A compromise is a wall temperature of 90 °C. The viscosity of the oil is optimized for just this temperature. Any cooling of the exhaust and the turbine of the turbocharger reduces the amount of power available to the turbine, so the exhaust system is often insulated between engine and turbocharger to keep the exhaust gasses as hot as possible.
Thermoelectric cooling uses the Peltier effect to create a heat flux at the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, depending on the direction of the current.
Adding exhaust gas therefore reduces pressure and temperature during the isentropic compression in the cylinder, thereby lowering the adiabatic flame temperature. In a typical automotive spark-ignited (SI) engine, 5% to 15% of the exhaust gas is routed back to the intake as EGR. The maximum quantity is limited by the need of the mixture to ...
Amazon told her to speak with Integrity about it; Integrity told her to speak with Amazon. What Branch believed to be her long-awaited promotion turned out to be her layoff, she said. Antonio Miller was a temp at the Chester facility in 2013, after graduating from Radford University with a bachelor's degree in political science.
By reducing the temperature of the intake air, the air becomes denser (allowing more fuel to be injected, resulting in increased power) and less likely to suffer from pre-ignition or knocking. Additional cooling can be provided by externally spraying a fine mist onto the intercooler surface, or even into the intake air itself , to further ...
A keel cooler is a type of internal combustion engine cooling system used in marine engines. In this system, engine coolant is circulated through a system of tubing outside the vessel's hull, using the lower temperature of seawater to reduce the coolant temperature via heat exchange before it is recirculated through the engine. [ 1 ]