Search results
Results from the WOW.Com Content Network
The slower a front wheel spins, the faster it will precess when the bike leans, and vice versa. [48] The rear wheel is prevented from precessing by friction of the tires on the ground, and so continues to lean as though it were not spinning at all. Hence gyroscopic forces do not provide any resistance to tipping. [49]
A step of 7% corresponds to a 1-tooth change from a 14-tooth sprocket to a 15-tooth sprocket, while a step of 15% corresponds to a 2-tooth change from a 13-tooth sprocket to a 15-tooth sprocket. By contrast, car engines deliver power over a much larger range of speeds than cyclists' legs do, so relative differences of 30% or more are common for ...
The cage rotates in its plane and is spring-loaded to take up chain slack. The cage is positioned under the desired sprocket by an arm that can swing back and forth under the sprockets. The arm is usually implemented with a parallelogram mechanism to keep the cage properly aligned with the chain as it swings back and forth.
Brake: devices used to stop or slow down a bicycle. Rim brakes and disc brakes are operated by brake levers, which are mounted on the handlebars. Band brake is an alternative to rim brakes but can only be installed at the rear wheel. Coaster brakes are operated by pedaling backward; Brake lever: a lever for actuating a bicycle brake
The XR1200 had an Evolution engine tuned to produce 91 bhp (68 kW), four-piston dual front disc brakes, and an aluminum swing arm. Motorcyclist had the XR1200 on the cover of its July 2008 issue, and was generally positive about it in their "First Ride" story, in which Harley-Davidson was repeatedly asked to sell it in the United States. [ 15 ]
The second half of the test involved subjects performing a 100-m sprint on a man-made track using radar to measure the forward speed of runners to create velocity-time curves. The main result of this study showed that the force application technique (rather than simply the total amount of force applied) is the key determinant factor in ...
The composite action test (double flank) is a method of inspection in which the work gear is rolled in tight double flank contact with a master gear or a specified gear, in order to determine (radial) composite variations (deviations). The composite action test must be made on a variable center distance composite action test device.
Cutting speed may be defined as the rate at the workpiece surface, irrespective of the machining operation used. A cutting speed for mild steel of 100 ft/min is the same whether it is the speed of the cutter passing over the workpiece, such as in a turning operation, or the speed of the cutter moving past a workpiece, such as in a milling operation.