Search results
Results from the WOW.Com Content Network
The field of strength of materials ... Strengthening mechanisms that alter the strength of a material include work hardening, solid solution strengthening, ...
The Hall-Petch effect illustrates that the yield strength of materials increases with decreasing grain size. However, many researchers have found that the nanocrystalline materials will soften when the grain size decreases to the critical point, which is called the inverse Hall-Petch effect.
Stress–strength analysis is the analysis of the strength of the materials and the interference of the stresses placed on the materials, where "materials" is not necessarily the raw goods or parts, but can be an entire system. Stress-Strength Analysis is a tool used in reliability engineering.
In metallurgy, solid solution strengthening is a type of alloying that can be used to improve the strength of a pure metal. [1] The technique works by adding atoms of one element (the alloying element) to the crystalline lattice of another element (the base metal), forming a solid solution .
Ways of increasing the strength of materials. Subcategories. This category has only the following subcategory. S. ... Solid solution strengthening; W. Work hardening
Work hardening, also known as strain hardening, is the process by which a material's load-bearing capacity (strength) increases during plastic (permanent) deformation. This characteristic is what sets ductile materials apart from brittle materials. [1] Work hardening may be desirable, undesirable, or inconsequential, depending on the application.
The theoretical strength of a solid is the maximum possible stress a perfect solid can withstand. It is often much higher than what current real materials can achieve. The lowered fracture stress is due to defects, such as interior or surface cracks.
The maximum stress criterion assumes that a material fails when the maximum principal stress in a material element exceeds the uniaxial tensile strength of the material. Alternatively, the material will fail if the minimum principal stress σ 3 {\displaystyle \sigma _{3}} is less than the uniaxial compressive strength of the material.