Search results
Results from the WOW.Com Content Network
As long as the load of a ship remains stable, G is fixed (relative to the ship). For small angles, M can also be considered to be fixed, while B moves as the ship heels. The metacentric height (GM) is a measurement of the initial static stability of a floating body. [1]
Water accumulating in the hull usually drains to the bilges, lowering the center of gravity and actually increasing the metacentric height. This assumes the ship remains stationary and upright. However, once the ship is inclined to any degree (a wave strikes it for example), the fluid in the bilge moves to the lower side. This results in a list.
The vessel is in normal operational configuration. The hull is not breached in any compartment. The vessel will be expected to meet various stability criteria such as GMt (metacentric height), area under the GZ (righting lever) curve, range of stability, trim, etc.
An inclining test is a test performed on a ship to determine its stability, lightship weight and the coordinates of its center of gravity.The test is applied to newly constructed ships greater than 24m in length, and to ships altered in ways that could affect stability.
Angle of loll is the state of a ship that is unstable when upright (i.e. has a negative metacentric height) and therefore takes on an angle of heel to either port or starboard. When a vessel has negative metacentric height (GM) i.e. , is in unstable equilibrium, any external force applied to the vessel will cause it to start heeling.
This includes information on precautions against capsizing, metacentric heights (GM), righting levers (GZ), rolling criteria, Free surface effect and watertight integrity. [1] The 2008 version of the Code details guidelines on Second Generation Intact Stability for ships, specifically criteria for dynamic stability and damage assessment. [7]
The first leg of the ship’s journey to her new underwater home off the coast of Florida was to be a quite short one — from Pier 82 to Pier 80 in Philadelphia.
Lightweight displacement – LWD – The weight or mass of the ship excluding cargo, fuel, ballast, stores, passengers, and crew, but with water in the boilers to steaming level. Loadline displacement – The weight or mass of the ship loaded to the load line or plimsoll mark. Deadweight tonnage (DWT) is a measure of how much weight a ship can ...