enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Drip irrigation - Wikipedia

   en.wikipedia.org/wiki/Drip_irrigation

   Drip irrigation systems distribute water through a network of valves, pipes, tubing, and emitters. Depending on how well designed, installed, maintained, and operated it is, a drip irrigation system can be more efficient than other types of irrigation systems, such as surface irrigation or sprinkler irrigation.

3. Irrigation sprinkler - Wikipedia

   en.wikipedia.org/wiki/Irrigation_sprinkler

   Rainguns are similar to impact sprinklers, except that they generally operate at very high pressures of 2.8 to 9.0 bar (280 to 900 kPa; 40 to 130 lbf/in 2) and flows of 3 to 76 L/s (50 to 1,200 US gal/min), usually with nozzle diameters in the range of 10 to 50 mm (0.5 to 1.9 in). In addition to irrigation, guns are used for industrial ...

4. Micro-irrigation - Wikipedia

   en.wikipedia.org/wiki/Micro-irrigation

   Micro-irrigation, also called Micro-spray,localized, low-volume, low-flow, or trickle irrigation, is an irrigation method with lower water pressure and flow than a traditional sprinkler system. Low-volume irrigation is used in agriculture for row crops , orchards , and vineyards .

5. Center-pivot irrigation - Wikipedia

   en.wikipedia.org/wiki/Center-pivot_irrigation

   A small center pivot system from beginning to end. Irrigation equipment can also be configured to move in a straight line, where it is termed a lateral move, linear move, wheel move or side-roll irrigation system. [11] [12] In these systems the water is supplied by an irrigation channel running the length of the field. The channel is positioned ...

6. Pulse drip irrigation - Wikipedia

   en.wikipedia.org/wiki/Pulse_drip_irrigation

   A one-US-gallon-per-hour (3.8 L) drip flow controller feeding an 82-foot-long (25 m) drip line with check valves comprising 82 drip points along its length so each drip point is putting out about 1 / 82 US gallon (46 mL) per hour. Crimson clover sprouts grown on 1 / 8-inch (0.32 cm) urethane foam mats

7. Plastic pipework - Wikipedia

   en.wikipedia.org/wiki/Plastic_pipework

   Pipes, fittings, valves, and accessories make up a plastic pressure pipe system. The range of pipe diameters for each pipe system does vary. However, the size ranges from 12 to 400 mm (0.472 to 15.748 in) and 3 ⁄ 8 to 16 in (9.53 to 406.40 mm). Pipes are extruded and are generally available in: 3 m (9.84 ft), 4 m (13.12 ft), 5 m (16.40 ft ...