Ads
related to: sn03xl battery
Search results
Results from the WOW.Com Content Network
A Battery: Eveready 742: 1.5 V: Metal tabs H: 101.6 L: 63.5 W: 63.5 Used to provide power to the filament of a vacuum tube. B Battery: Eveready 762-S: 45 V: Threaded posts H: 146 L: 104.8 W: 63.5 Used to supply plate voltage in vintage vacuum tube equipment. Origin of the term B+ for plate voltage power supplies.
Standard battery nomenclature describes portable dry cell batteries that have physical dimensions and electrical characteristics interchangeable between manufacturers. The long history of disposable dry cells means that many manufacturer-specific and national standards were used to designate sizes, long before international standards were reached.
An N battery (or N cell) is a standard size of dry-cell battery. An N battery is cylindrical with electrical contacts on each end; the positive end has a bump on the top. The battery has a length of 30.2 mm (1.19 in) and a diameter of 12.0 mm (0.47 in), and is approximately three-fifths the length of a AA battery.
Nickel–zinc batteries have a charge–discharge curve similar to 1.2 V NiCd or NiMH cells, but with a higher 1.6 V nominal voltage. [5]Nickel–zinc batteries perform well in high-drain applications, and may have the potential to replace lead–acid batteries because of their higher energy-to-mass ratio and higher power-to-mass ratio – as little as 25% of the mass for the same power. [6]
The nine-volt battery, or 9-volt battery, is an electric battery that supplies a nominal voltage of 9 volts. Actual voltage measures 7.2 to 9.6 volts, depending on battery chemistry. Batteries of various sizes and capacities are manufactured; a very common size is known as PP3, introduced for early transistor radios. The PP3 has a rectangular ...
A nanowire battery uses nanowires to increase the surface area of one or both of its electrodes, which improves the capacity of the battery. Some designs (silicon, germanium and transition metal oxides ), variations of the lithium-ion battery have been announced, although none are commercially available.
Cut-away schematic diagram of a sodium–sulfur battery. A sodium–sulfur (NaS) battery is a type of molten-salt battery that uses liquid sodium and liquid sulfur electrodes. [1] [2] This type of battery has a similar energy density to lithium-ion batteries, [3] and is fabricated from inexpensive and low-toxicity materials.
The silver–zinc battery is manufactured in a fully discharged condition and has the opposite electrode composition, the cathode being of metallic silver, while the anode is a mixture of zinc oxide and pure zinc powders. The electrolyte used is a potassium hydroxide solution in water.
Ads
related to: sn03xl battery