Search results
Results from the WOW.Com Content Network
Many GPS receivers can relay position data to a PC or other device using the NMEA 0183 protocol. Although this protocol is officially defined by the National Marine Electronics Association (NMEA), [ 110 ] references to this protocol have been compiled from public records, allowing open source tools like gpsd to read the protocol without ...
GNSS systems that provide enhanced accuracy and integrity monitoring usable for civil navigation are classified as follows: [5] GNSS-1 is the first generation system and is the combination of existing satellite navigation systems (GPS and GLONASS), with Satellite Based Augmentation Systems (SBAS) or Ground Based Augmentation Systems (GBAS). [5]
In CNAV, at least 1 out of every 4 packets are ephemeris data and the same lower bound applies for clock data packets. [25] The design allows for a wide variety of packet types to be transmitted. With a 32-satellite constellation, and the current requirements of what needs to be sent, less than 75% of the bandwidth is used.
A data pusher is the most common type of GPS tracking unit, used for asset tracking, personal tracking and vehicle tracking systems. Virtually every cell phone is in this mode per user agreement, even if shut off or disabled storing the data for future transmission.
Assisted GNSS (A-GNSS) is a GNSS augmentation system that often significantly improves the startup performance—i.e., time-to-first-fix (TTFF)—of a global navigation satellite system (GNSS). A-GNSS works by providing the necessary data to the device via a radio network instead of the slow satellite link, essentially "warming up" the receiver ...
A data link is a means of connecting one location to another for the purpose of transmitting and receiving digital information (data communication). It can also refer to a set of electronics assemblies, consisting of a transmitter and a receiver (two pieces of data terminal equipment ) and the interconnecting data telecommunication circuit .
A software GNSS receiver is a Global Navigation Satellite System (GNSS) receiver that has been designed and implemented using software-defined radio.. A GNSS receiver, in general, is an electronic device that receives and digitally processes the signals from a navigation satellite constellation in order to provide position, velocity and time (of the receiver).
A typical CORS setup consists of a single reference station from which the raw data (or corrections) are sent to the rover receiver (i.e., the user). The user then forms the carrier phase differences (or corrects their raw data) and performs the data processing using the differential corrections. In contrast, GNSS network architectures often ...