Search results
Results from the WOW.Com Content Network
A chassis ground is a link between different metallic parts of a machine to ensure an electrical connection between them. [1] Examples include electronic instruments and motor vehicles. Usages
In electrical engineering, an electrical isolation test is a direct current (DC) or alternating current (AC) resistance test that is performed on sub-systems of an electronic system to verify that a specified level of isolation resistance is met. Isolation testing may also be conducted between one or more electrical circuits of the same ...
The 14CUX PROM may contain up to five fuel maps, which allowed a single ROM image to contain maps for multiple target markets. In some markets, the active map is selectable by placing an external tune resistor on a particular pin of the ECU. This external map selection was disabled in the code for North American specification (NAS) vehicles.
The use of the term ground (or earth) is so common in electrical and electronics applications that circuits in portable electronic devices, such as cell phones and media players, as well as circuits in vehicles, may be spoken of as having a "ground" or chassis ground connection without any actual connection to the Earth, despite "common" being ...
Electrical equipment may be designed with a floating ground for one of several reasons. One is safety. For example, a low-voltage DC power supply, such as a mobile phone charger, is connected to the mains through a transformer of one type or another, and there is no direct electrical connection between the current return path on the low-voltage side and physical ground (earth).
$07 Minimum voltage for test; $08 Maximum voltage for test; $09 Time between voltage transitions in ms; See OBD-II PIDs#Service_05 for a list. Service / Mode $06 is a Request for On-Board Monitoring Test Results for Continuously and Non-Continuously Monitored System. There are typically a minimum value, a maximum value, and a current value for ...
Wire crossover symbols for circuit diagrams. The CAD symbol for insulated crossing wires is the same as the older, non-CAD symbol for non-insulated crossing wires. To avoid confusion, the wire "jump" (semi-circle) symbol for insulated wires in non-CAD schematics is recommended (as opposed to using the CAD-style symbol for no connection), so as to avoid confusion with the original, older style ...
The Proving Ground consists of 1,498 acres (6.06 km 2) located less than one hour northwest of the Phoenix Sky Harbor Airport at an elevation of 1,650 feet (500 m). The facility was originally a Volvo facility (VAPG) but was transitioned to the Ford branding in the summer of 2009 and renamed the Arizona Proving Ground (APG).