Ads
related to: digital splitter vs regular
Search results
Results from the WOW.Com Content Network
In regular DSL, a cable runs from the telephone switch to a piece of equipment called a Plain Old Telephone Service (POTS) splitter. This splitter separates the DSL and voice bands. Thus the customer will have a dial tone, which allows them to use the telephone line as a regular land line while they are using it to access the Internet on their ...
Modern ADSL filter/splitter (left) and filter (right). ADSL works by using spectrum above the band used by voice telephone calls. [1] With a DSL filter, often called splitter, the frequency bands are isolated, permitting a single telephone line to be used for both ADSL service and telephone calls at the same time.
A DSL filter (also DSL splitter or microfilter) is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a plain old telephone service (POTS) line. The DSL filter prevents interference between such devices and a digital subscriber line (DSL) service connected to the same line. Without DSL filters ...
Digital subscriber line (DSL; originally digital subscriber loop) is a family of technologies that are used to transmit digital data over telephone lines. [1] In telecommunications marketing, the term DSL is widely understood to mean asymmetric digital subscriber line (ADSL), the most commonly installed DSL technology, for Internet access .
Multiple cables to different rooms are split off the incoming cable with a small device called a splitter. There are two standards for cable television; older analog cable, and newer digital cable which can carry data signals used by digital television receivers such as high-definition television (HDTV) equipment. All cable companies in the ...
Power dividers (also power splitters and, when used in reverse, power combiners) and directional couplers are passive devices used mostly in the field of radio technology. They couple a defined amount of the electromagnetic power in a transmission line to a port enabling the signal to be used in another circuit.
The two phrases, "customer-premises equipment" and "customer-provided equipment", reflect the history of this equipment.Under the Bell System monopoly in the United States (post Communications Act of 1934), the Bell System owned the telephones, and one could not attach privately owned or supplied devices to the network, or to the station apparatus.
Downstream traffic in active (top) vs. passive optical network. A passive optical network consists of an optical line terminal (OLT) at the service provider's central office (hub), passive (non-power-consuming) optical splitters, and a number of optical network units (ONUs) or optical network terminals (ONTs), which are near end users.
Ads
related to: digital splitter vs regular