Search results
Results from the WOW.Com Content Network
In some cases, it is used instead of a larger diameter clutch. Drag racing cars use multi-plate clutches to control the rate of power transfer to the wheels as the vehicle accelerates from a standing start. Some clutch disks include springs designed to change the natural frequency of the clutch disc, in order to reduce NVH within the
Slipping the clutch (sometimes referred to as feathering the clutch) is a term used by automotive enthusiasts to describe when the driver alternately applies and releases the clutch to achieve some movement of the car. It's called slipping because the clutch plate will slip against the flywheel surface when such
The best-known is the fluid flywheel, used for touring cars such as the Daimler (Armstrong Siddeley used a centrifugal clutch). [2] Sports cars used a Newton centrifugal clutch . [ 2 ] This was a multiple plate dry clutch , similar to racing manual clutches of the time, but with the pressure plate centrifugally actuated to engage at around ...
These valves have been unpopular with some drivers and are sometimes removed in favour of a conventional clutch action. [2] The BMW valve takes the form of a separate pipe fitting and is easily removed. Honda has also used clutch delay valves on some Civic models, which are integral to the clutch slave cylinder and must be dismantled in situ. [3]
The clutch brake not only slows or stops the idle gear axis but can also prevent shifting into gear until the clutch pedal is released a few centimetres (or inches) off the floor. In order to shift into gear, the clutch must be halfway off the floor, otherwise, the clutch brake will prevent the transmission from being shifted into or out of gear.
Automatic clutch plus a torque converter. Used in the Citroën GS and Citroën CX. Originally called Convertisseur in GS models. 1991–1993: Ferrari Valeo: Automatic electro-mechanical clutch. Used in the Ferrari Mondial t. [77] [78] 1992–1998: RUF EKS: Automatic electro-hydraulic clutch. Used in the Ruf BTR [79] and Ruf BTR2. 1993–1998 ...
They should not be used in high speed applications or applications that have engagement speeds over 50 rpm otherwise damage to the clutch teeth would occur when trying to engage the clutch. How it works – Electromagnetic tooth clutches operate via an electric actuation but transmit torque mechanically.
The selector is typically symmetric: it slides between two gears and has a synchromesh and teeth on each side in order to lock either gear to the shaft. Unlike some other types of clutches (such as the foot-operated clutch of a manual-transmission car), a dog clutch provides non-slip coupling and is not suited to intentional slipping.